Buckmaster PB12

Double barrel, side by side, over-under, semi-automatic, straight-pull and lever action shotguns.

Re: Buckmaster PB12

Post by Slidebite » 08 Sep 2022, 1:29 pm

The stock adapter was from SJ hardware’s online store they also do one to suit stoeger. I did try the adapter on my dickinson t1000 and it did fit although the thread pitch in the receiver was different but would work with the correct sized stock bolt.

I know in NSW you can’t fit a magazine extension but you can get around that by replacing the entire tube with one of a higher capacity. Problem is nobody sells or makes longer tubes just screw on extensions.
Slidebite
Recruit
Recruit
 
Posts: 2
New South Wales

Re: Buckmaster PB12

Post by Empie » 23 Oct 2022, 3:14 pm

Anyone know if the short barrel is rifled?
Empie
Recruit
Recruit
 
Posts: 19
Western Australia

Re: Buckmaster PB12

Post by bladeracer » 23 Oct 2022, 3:34 pm

Empie wrote:Anyone know if the short barrel is rifled?


No idea but you could use a rifled choke tube.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 11803
Victoria

Re: Buckmaster PB12

Post by Empie » 23 Oct 2022, 6:51 pm

bladeracer wrote:
Empie wrote:Anyone know if the short barrel is rifled?


No idea but you could use a rifled choke tube.


Thanks. I'm looking for something to put sabots through.
Empie
Recruit
Recruit
 
Posts: 19
Western Australia

Re: Buckmaster PB12

Post by mchughcb » 23 Oct 2022, 9:46 pm

Buy some rottweil exact. You find them surprisingly accurate up to 100m.
User avatar
mchughcb
Warrant Officer C2
Warrant Officer C2
 
Posts: 1189
Victoria

Re: Buckmaster PB12

Post by Jakethefake » 01 Nov 2022, 2:35 pm

mchughcb wrote:Still won't outshoot a triple though.


It does on the fourth shot.
Jakethefake
Private
Private
 
Posts: 51
Queensland

Re: Buckmaster PB12

Post by mchughcb » 02 Nov 2022, 11:38 pm

Jakethefake wrote:
mchughcb wrote:Still won't outshoot a triple though.


It does on the fourth shot.


Don't be so sure about that either.
User avatar
mchughcb
Warrant Officer C2
Warrant Officer C2
 
Posts: 1189
Victoria

Re: Buckmaster PB12

Post by Jakethefake » 03 Nov 2022, 9:01 pm

mchughcb wrote:
Jakethefake wrote:
mchughcb wrote:Still won't outshoot a triple though.


It does on the fourth shot.


Don't be so sure about that either.


Well I'd like so see someone get off the fourth shot with a triple faster than pressing the lever on the lever release. Assuming the lever release gun is functioning correctly and not jammed.
I haven't played with a lever release, but I can certainly get off a third, fourth and fifth shot off with my straight pull faster than I can with my double. Of course, the double wins the second shot every time.
Maybe some of those cowboy action guys can run a double or triple faster than a repeating shotgun.
Jakethefake
Private
Private
 
Posts: 51
Queensland

Re: Buckmaster PB12

Post by S O K A R » 15 Nov 2022, 12:35 am

I'd expect this to get reclassified in the near future after the review that clown ozzie reviews just did.
Suffer the pain of discipline or suffer the pain of regret.
S O K A R
Lance Corporal
Lance Corporal
 
Posts: 144
Tasmania

Re: Buckmaster PB12

Post by bigpete » 15 Nov 2022, 7:37 am

S O K A R wrote:I'd expect this to get reclassified in the near future after the review that clown ozzie reviews just did.

Always the way
bigpete
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3181
South Australia

Re: Buckmaster PB12

Post by likeimjohnwayne » 15 Nov 2022, 3:27 pm

bigpete wrote:
S O K A R wrote:I'd expect this to get reclassified in the near future after the review that clown ozzie reviews just did.

Always the way


What the deal with this?

Does it bring negative exposure or something?

I noticed he made a big post on FB about it.
likeimjohnwayne
Recruit
Recruit
 
Posts: 27
South Australia

Re: Buckmaster PB12

Post by S O K A R » 15 Nov 2022, 6:34 pm

likeimjohnwayne wrote:
What the deal with this?

Does it bring negative exposure or something?

I noticed he made a big post on FB about it.


From my perspective, nothing wrong with the review itself.
My issue with his review is the need to demonstrate the rapid fire ability (on par with a pump action, if not quicker).
I know if I was part of an anti gun organisation, that would be the icing on the cake to push for it to be cat c or d.
Suffer the pain of discipline or suffer the pain of regret.
S O K A R
Lance Corporal
Lance Corporal
 
Posts: 144
Tasmania

Re: Buckmaster PB12

Post by mchughcb » 15 Nov 2022, 10:41 pm

It fires lots of ammunitions - Sam Lee.
User avatar
mchughcb
Warrant Officer C2
Warrant Officer C2
 
Posts: 1189
Victoria

Re: Buckmaster PB12

Post by idiomatically » 21 Nov 2022, 6:33 pm

Slidebite wrote:Bought a S&J hardware turkish to 870 stock adapter and fitted a magpul 870 sga stock. Feels 100 times better now. Also found the original charging handle quite sharp so I swapped it out for an extended charging handle from a F12 Typhoon semi auto fits perfectly and feels much nicer.


Okay please bare with me, as I am very new just got my FA license here in QLD and have a PB12 on order. Are these parts able to be ordered online and imported or do you have to go via dealer and convince them to order these items in for you? Thanks.
idiomatically
Recruit
Recruit
 
Posts: 2
Queensland

Re: Buckmaster PB12

Post by mchughcb » 22 Nov 2022, 10:40 pm

S O K A R wrote:
likeimjohnwayne wrote:
What the deal with this?

Does it bring negative exposure or something?

I noticed he made a big post on FB about it.


From my perspective, nothing wrong with the review itself.
My issue with his review is the need to demonstrate the rapid fire ability (on par with a pump action, if not quicker).
I know if I was part of an anti gun organisation, that would be the icing on the cake to push for it to be cat c or d.


You know how hard it is to continually shoot the same static target 5 times and pretend it's a mob of pigs?
User avatar
mchughcb
Warrant Officer C2
Warrant Officer C2
 
Posts: 1189
Victoria

Previous

Back to top
 
Return to Shotguns - 12 gauge, 28 gauge, 410 bore etc.