anyone using a 204 ruger ?

Calibres, cartridges, ballistics tables and ammunition information.

anyone using a 204 ruger ?

Post by bigrich » 20 Nov 2026, 4:17 pm

hey fellas , thought i'd post this topic out of curiosity and the hope of learning something ;) looking at paper ballistics the 204 ruger is interesting , saw a old statement from uncle nick, he thought the 204 was the flattest shooting, most inherently accurate varmint calibre ever devised . reckons it was his favourite. doesn't use much powder either . anyone got any input or does the 22-250 still rule the roost ? look forward to your replies , cheers :thumbsup:
bigrich
General
General
 
Posts: 6776
Queensland

Re: anyone using a 204 ruger ?

Post by Wapiti » 20 Nov 2026, 6:24 pm

Uncle Nick used to surprise me towards the end of his career, stark difference to his earlier no-holds-barred truthfulness, he resorted to being forced to repeat the bullsh"t he was being told to write.
He even wrote an article about it and how he was embarrassed he'd did it.

I'll never forget his backtracking on his initial. 204 thoughts, as well as the .17 HMR.
Andy Montgomery and Breil Jackson (Guns n Game Magazine) told it how it was from a graziers knowledge, not from marketing sales like Sporting Shooter does and continues to do. They did not speak highly of that cartridge except to say that it was comparable to 223 in precision, or the 222 Magnum.
Last edited by Wapiti on 20 Nov 2026, 8:49 pm, edited 1 time in total.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: anyone using a 204 ruger ?

Post by bladeracer » 20 Nov 2026, 6:53 pm

bigrich wrote:hey fellas , thought i'd post this topic out of curiosity and the hope of learning something ;) looking at paper ballistics the 204 ruger is interesting , saw a old statement from uncle nick, he thought the 204 was the flattest shooting, most inherently accurate varmint calibre ever devised . reckons it was his favourite. doesn't use much powder either . anyone got any input or does the 22-250 still rule the roost ? look forward to your replies , cheers :thumbsup:


Yep, and I like it. But it is a very limited cartridge due to bullet choices. Basically limited to 24gn to 40gn bullets, small targets only. An 8"-twist .223 can use bullets from 30gn up to 80gn and more, making it a much more versatile choice. But I never managed to load any .204 load that wasn't immediately accurate, it just works well. When the 32gn Zombie VMax bullets were available it was even pretty cheap to shoot.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 14029
Victoria

Re: anyone using a 204 ruger ?

Post by GQshayne » 20 Nov 2026, 6:53 pm

bigrich wrote:hey fellas , thought i'd post this topic out of curiosity and the hope of learning something ;) looking at paper ballistics the 204 ruger is interesting , saw a old statement from uncle nick, he thought the 204 was the flattest shooting, most inherently accurate varmint calibre ever devised . reckons it was his favourite. doesn't use much powder either . anyone got any input or does the 22-250 still rule the roost ? look forward to your replies , cheers :thumbsup:


It does not seem to get the publicity that it once did, and I read about it less nowadays. I think it has its place, just like a 17 Rem etc. But for most people, the .223 will just make more sense.
GQshayne
Warrant Officer C2
Warrant Officer C2
 
Posts: 1037
Queensland

Re: anyone using a 204 ruger ?

Post by bigrich » 20 Nov 2026, 7:23 pm

thanks for your replies fellas , it confirms what i already thought . agreed it is a niche calibre , on paper at least it does seem like good bang for your buck though . i have a 222 for comp work and a 223 tikka that shoots bug holes with 60 vmax's for the paddock. i've found through experience the 60's hit harder on heart/chest shots on hoppers than 55's . i think if foxing or long range rabbits were a opportunity for me a 204 would be of use , but in the interests of financial sanity my 223 is more practical . still, i like to learn stuff and i do find the 204 interesting :D good to hear blade the hype about the 204 being inherently accurate isn't just marketing :thumbsup:
bigrich
General
General
 
Posts: 6776
Queensland

Re: anyone using a 204 ruger ?

Post by Wapiti » 21 Nov 2026, 6:44 am

I wonder how anyone could have credibility after writing that a 204 or anything else, is inherently inaccurate, Rich.
It would be more likely a design of the firearm type using it?

I had read a few times over a lifetime, that for example the 7.62x54R was an inaccurate cartridge.
But I reckon, I don't think so.
Worn out sloppy bolt actions, huge clearances, poor Russian/Chinese machining tolerance and rifle design would make that the reason. Or the Drugonov "sniper" rifle using the cartridge. Known as being not that precise. Ever seen slow-mo video of one firing?
The barrel whips away from the gas system above and bends, the top cover rises and tips, the scope on the Sydney-Harbour flimsy mount twists... and then the bullet exits...
Yes I know a .204 is chambered in better firearms than that, but there have been some doosies from Marlin and Savage from the 2010 era.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: anyone using a 204 ruger ?

Post by bigrich » 21 Nov 2026, 8:52 am

Wapiti wrote:I wonder how anyone could have credibility after writing that a 204 or anything else, is inherently inaccurate, Rich.
It would be more likely a design of the firearm type using it?

I had read a few times over a lifetime, that for example the 7.62x54R was an inaccurate cartridge.
But I reckon, I don't think so.
Worn out sloppy bolt actions, huge clearances, poor Russian/Chinese machining tolerance and rifle design would make that the reason. Or the Drugonov "sniper" rifle using the cartridge. Known as being not that precise. Ever seen slow-mo video of one firing?
The barrel whips away from the gas system above and bends, the top cover rises and tips, the scope on the Sydney-Harbour flimsy mount twists... and then the bullet exits...
Yes I know a .204 is chambered in better firearms than that, but there have been some doosies from Marlin and Savage from the 2010 era.


mmm, yeah . shoulder angle , case fill , many variables . as another forum member wrote about the 6mm man bun , lower variations in fps with loads versus the 243 , probably due to sharper shoulder angle and straighter case walls , which is why comp cartridges have gravitated to wider cases versus longer cases for comp work , 6MM BR and 6MM PPC being examples, if they didn't win people wouldn't be using them . better more consistent accuracy and powder burn due to case design . i found the 243 i had to be fussy to load for , very accurate with 87 vmaxs when i found the good load however :)
i know from experience it's hard to find a bad load for 222 rem . yanks running rifle comps in the US had to reduce the size of the bullseye when people started using 308 instead of 30-06 due to the amount of tied scores with the 308 . they 308 just shot smaller groups due to a more efficient case design . i'm not saying a 30-06 can't be loaded for accuracy , but it's more finicky than 308 in my experience . the rifle action and build quality can have real bearing on accuracy no doubts . i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

in the meantime i'm quite happy shooting my rem 700 in 222 off the bench from .2's down to bug holes :D , shooting offhand in feild rifle comps it's up to me , but i can't blame my rifle if i don't do well . my 12 twist 223 T3 is more than accurate to do the jobs i ask of it , i actually spent a fair bit of money on the old remington to get it to shoot better than the tikka in it's factory tupperware stock ;) . hunting accuracy in general is the size of a orange at 200 meters IMHO , but i'm OCD and like to deep dive into the technical aspects of ballistics ;) can't help myself .... :roll: and cartridge case design is something i'm more than happy to look into , even though i mostly own "classic" cartridges and rifles :thumbsup:
bigrich
General
General
 
Posts: 6776
Queensland

Re: anyone using a 204 ruger ?

Post by Wapiti » 21 Nov 2026, 1:19 pm

I reckon so much of the stuff written online is VERY dubious.
Even in my cheapie Howa 243, by just trying a different powder I get a huge drop in SD, I've posted here on first try loads SD's of 2.4 etc.
AND I guarantee, that's all arse NOT any class.
Whenever a new manbun comes out, people rush to buy and them - usually to try and shortcut so much else that they haven't learned yet, but when they find out it's just another case with a "buy me" name after it, start punching the keyboard to justify to themselves that they have something magic.

I remember this when we were into the latest HSV's and would go down to Norwell track on club days. there were these dudes who got the knob-polishing treatment from HSV cos they would have the newest model constantly on order, even thought it wasn't even released yet. They got one before everyone else and brought it down to the track, with the wife in the model before pulling the dinky trailer with 4 track tyres.
These guys always stood out because they couldn't master that track or the skid pan, no matter what money could buy. Every time they brought the latest one down, everyone would race over, ooohing and aaahing and giving them a head-swell. Then old-mate'd get behind the wheel and lose it. Get so frustrated he'd storm off.
But everyone STILL raced over there to see more of exactly the same thing, watching him struggle to learn it's differences and never listening to others who could get any older model lapping around him, because they understood how to drive.
They learned THAT by listening not to the people who thought money bought success, but by people who understood motor cars.
But his social media posts told everyone to line up at the dealers and buy one like his, because it was the answer to all human failings. Those that saw him on the track and lapped him knew it was BS, however.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: anyone using a 204 ruger ?

Post by Wapiti » 21 Nov 2026, 1:25 pm

bigrich wrote: i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

I've only seen a few in visitors who love everything new, and a neighbour here who's one of those blokes who always answer anything being said with a "that's nothing, my blahblah can do...."
I don't care how fast something is, a grain of rice just has less energy. Can't cheat physics.
It's been maga years since I've been out with neighbours who could shoot 22-250 and 220 Swift, but their performance is way better. I do not remember so many follow-ups and terribly wounded roos.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: anyone using a 204 ruger ?

Post by bigrich » 21 Nov 2026, 4:37 pm

Wapiti wrote:
bigrich wrote: i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

I've only seen a few in visitors who love everything new, and a neighbour here who's one of those blokes who always answer anything being said with a "that's nothing, my blahblah can do...."
I don't care how fast something is, a grain of rice just has less energy. Can't cheat physics.
It's been maga years since I've been out with neighbours who could shoot 22-250 and 220 Swift, but their performance is way better. I do not remember so many follow-ups and terribly wounded roos.


yeah mate , re your last 2 posts, i agree there's a lot of hype and marketing at play with the new fad calibre in rifles, to the latest supercar with all the trimmings. that's why i started this topic to get feedback from fellas who own and use the 204 and whether or not some prefer the 22-250 , or 243 shooting light for caliber projectiles . i'm not really entertaining the idea of a 204 for myself , i wouldn't get the use out of it . thought it might make a interesting topic for discussion and i might learn something :thumbsup:
bigrich
General
General
 
Posts: 6776
Queensland

Re: anyone using a 204 ruger ?

Post by bladeracer » 21 Nov 2026, 4:42 pm

Wapiti wrote:
bigrich wrote: i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

I've only seen a few in visitors who love everything new, and a neighbour here who's one of those blokes who always answer anything being said with a "that's nothing, my blahblah can do...."
I don't care how fast something is, a grain of rice just has less energy. Can't cheat physics.
It's been maga years since I've been out with neighbours who could shoot 22-250 and 220 Swift, but their performance is way better. I do not remember so many follow-ups and terribly wounded roos.


Yep, the .204 is range-limited due to the light bullets, despite their decent BC. The faster you send it the faster is slows down, the lighter it is the faster it slows down. The .204 doesn't need energy, but it does need enough retained velocity for the bullet to deform, otherwise it just drills a tiny almost self-healing hole. It is accurate enough that you can drill that tiny hole through somewhere important, like the brain, but it is also greatly effected by wind drift reducing the likelihood of perfect placement as range increases. I consider 300m to be the absolute maximum range for the .204.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 14029
Victoria

Re: anyone using a 204 ruger ?

Post by bigrich » 21 Nov 2026, 4:56 pm

bladeracer wrote:
Wapiti wrote:
bigrich wrote: i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

I've only seen a few in visitors who love everything new, and a neighbour here who's one of those blokes who always answer anything being said with a "that's nothing, my blahblah can do...."
I don't care how fast something is, a grain of rice just has less energy. Can't cheat physics.
It's been maga years since I've been out with neighbours who could shoot 22-250 and 220 Swift, but their performance is way better. I do not remember so many follow-ups and terribly wounded roos.


Yep, the .204 is range-limited due to the light bullets, despite their decent BC. The faster you send it the faster is slows down, the lighter it is the faster it slows down. The .204 doesn't need energy, but it does need enough retained velocity for the bullet to deform, otherwise it just drills a tiny almost self-healing hole. It is accurate enough that you can drill that tiny hole through somewhere important, like the brain, but it is also greatly effected by wind drift reducing the likelihood of perfect placement as range increases. I consider 300m to be the absolute maximum range for the .204.


still , for what it is , and the amount of powder used, i think ballistically it's impressive for what it is . years ago i watched on youtube some pommy hunter shooting a 17 hornet way out with incredible accuracy ,and was quite taken aback by that little round . i've been focused/interested in cartridge case design and efficiency recently , looking for possible ideas for another toy :) . the 6x45 interests me greatly as well as the 6mm 223 ackley/TCU . small amount of powder pushing 6mm bullets to good speeds for the powder burned . i was thinking one of those might make a good dual purpose comp/cull cartridge . i'd probably go 10 twist and nothing heavier than a 80gn bullet to keep velocity reasonable . deye243 was kind enough to have a chat on the phone to me some years ago about his 6x45 experience . 8 twist 223 would have a long distance ballistic edge , but the right 6mm bullet i'm thinking would hit harder out to 200-300 meters . be a good goat gun i reckon . i've digressed again :lol:
bigrich
General
General
 
Posts: 6776
Queensland

Re: anyone using a 204 ruger ?

Post by Wapiti » 21 Nov 2026, 5:10 pm

bladeracer wrote:
Wapiti wrote:
bigrich wrote: i'd be curious to hear how a T3 or rem 700 shoots in 204 on average , even with factory ammo accuracy reports are impressive . very flat shooting , not a lot of recoil for lighter pest control, what's not to like :unknown:

I've only seen a few in visitors who love everything new, and a neighbour here who's one of those blokes who always answer anything being said with a "that's nothing, my blahblah can do...."
I don't care how fast something is, a grain of rice just has less energy. Can't cheat physics.
It's been maga years since I've been out with neighbours who could shoot 22-250 and 220 Swift, but their performance is way better. I do not remember so many follow-ups and terribly wounded roos.


Yep, the .204 is range-limited due to the light bullets, despite their decent BC. The faster you send it the faster is slows down, the lighter it is the faster it slows down. The .204 doesn't need energy, but it does need enough retained velocity for the bullet to deform, otherwise it just drills a tiny almost self-healing hole. It is accurate enough that you can drill that tiny hole through somewhere important, like the brain, but it is also greatly effected by wind drift reducing the likelihood of perfect placement as range increases. I consider 300m to be the absolute maximum range for the .204.


I appreciate the comment from a shooter as experienced as you BR.

Problem is, the issue of head-shooting again, as whenever I bring it up, the comments against it are about 100%.
Because it's hard from field rests. So naturally people don't support it.

That's when you have to step up in cartridge size/power though. Sounds dumb, right?

That's where I've seen the issue with the 204, spotlighting at night on animals above big hares.
If the shot isn't spot-on, as in, it doesn't matter how small the gun can shoot groups off a sandbag, there's problems.
If that small .20 pill, slowing right down in comparison to a 55 or 60gn VMax in a 223, hits the skull off-centre to the brain, the result is not good. This is so easy to do from a padded rest where the rifle is in the shooters shoulder, he's in a vehicle idling (forget it) or the clown next to him swings his arm on a spotty or shifts his weight, you know what happens to the crosshairs. Then the impact point.
Lets just say that happens with a 223, with a bullet 2x the weight, odds are that the animal will be down but still needing a finisher with the .22, or the bat. Not good.
Step up to the 80gn 243, or 25-06, and the head is empty regardless of missing the brain.
I don't have a 25-06, so I use the varmint bullets in the 308 which people say, is wasteful, but any hit above the shoulders and there is no head. In the bush, I need that flexibility.
I only go on about this because bush shooting reality does not care about paper figures or sandbag groups.
When I see someone skiting about how great something is, how it's like a lightning bolt, then I see a few skips run off with their upper and lower jaw hanging off on a length of skin I will pull it up right there. I cartridge deemed as adequate does not do that when conditions are not range-perfect.

On the paper shooting, all well and good but the cost of brass, consumables etc doesn't bade well for the .204 as a range gun either.
On a sold rest off your shooting mat overlooking a rabbit warren, great. But then, components favour a .22-250.
But one must consume, regardless of physics and marketing.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: anyone using a 204 ruger ?

Post by GQshayne » 21 Nov 2026, 7:23 pm

My 2c on some cartridges being inherently accurate.

I have two exact rifles apart from calibre, and my father has a third - Tikka M55. Calibres are .243, 222, and.17. The .17 is the most accurate. Internet chat about how great they are has been my experience also.
GQshayne
Warrant Officer C2
Warrant Officer C2
 
Posts: 1037
Queensland

Re: anyone using a 204 ruger ?

Post by bigrich » 22 Nov 2026, 5:18 am

GQshayne wrote:My 2c on some cartridges being inherently accurate.

I have two exact rifles apart from calibre, and my father has a third - Tikka M55. Calibres are .243, 222, and.17. The .17 is the most accurate. Internet chat about how great they are has been my experience also.


thanks for your comments and experience mate . having identical rifles to compare calibres with is a rare opportunity . i take it your refering to the 17 rem ? also, just don't say anything bad about 222 in my presence please :P the 17 more accurate than 222, how dare you ! :lol: :lol: :thumbsup:
bigrich
General
General
 
Posts: 6776
Queensland


Back to top
 
Return to Calibres, cartridges and ballistics