Hornet quandry

Calibres, cartridges, ballistics tables and ammunition information.

Re: Hornet quandry

Post by straightshooter » 09 May 2019, 8:20 am

As long as you
1. Select a front locking actioned rifle
2. FLS only when necessary
3. Don't get adventurous with pressures (there isn't much brass surrounding the primer)
then you won't encounter any of the hoary horror stories associated with Hornet brass.
"Anything is possible if you don't know what you are talking about."
"There is no expedient to which a man will not resort to avoid the real labor of thinking." Sir Joshua Reynolds
straightshooter
Warrant Officer C1
Warrant Officer C1
 
Posts: 1270
New South Wales

Re: Hornet quandry

Post by bigrich » 09 May 2019, 10:45 am

straightshooter wrote:As long as you
1. Select a front locking actioned rifle
2. FLS only when necessary
3. Don't get adventurous with pressures (there isn't much brass surrounding the primer)
then you won't encounter any of the hoary horror stories associated with Hornet brass.


Nothing wrong with a good rear locker, my old 1960’s Krico makes one hole groups all the time, and has a match trigger that’s really like a thin glass rod breaking. The new weihrauch are a modern version of the Krico and are just as good if not better. Some of the old annie’s Can be a little average, depending on action type. At least this has been my experience with these rifles . I had a rebarreled early Brno a while ago in hornet , and it did not shoot that great so it got moved on. I found neck size only had issues with the neck ending up off centre, I partially full length size now with a light crimp and accuracy has been outstanding. I don’t seat close to the lands either which my rifle doesn’t mind. I’ve found it important to have enough of the projectile in the neck to help neck tension to stop “bullet jump” as opposed to seating closer to the lands. And small pistol primers help as well . Hope this helps someone, can’t hurt to try . Cheers
User avatar
bigrich
Major General
Major General
 
Posts: 4504
Queensland

Re: Hornet quandry

Post by Leadspitter » 09 May 2019, 1:03 pm

Thanks for all the help fellas

I feel i will get a 17 as dedicated fox rifle

I am warming to the idea of a 223 to load down for quietness to use on bigger game at full steam.

Leadspitter
Did you hear about the bloke who stopped talking to himself , because of something he said ?
Leadspitter
Private
Private
 
Posts: 51
New South Wales

Re: Hornet quandry

Post by Bruiser64 » 09 May 2019, 8:42 pm

Leadspitter wrote:Thanks for all the help fellas

I feel i will get a 17 as dedicated fox rifle

I am warming to the idea of a 223 to load down for quietness to use on bigger game at full steam.

Leadspitter


Good call. I think the 17 hornet will be an enjoyable rifle to shoot. The 223 is a very versatile calibre to complement the hornet.
Bruiser64
Corporal
Corporal
 
Posts: 387
Western Australia

Re: Hornet quandry

Post by marksman » 10 May 2019, 9:47 am

IMHO if you go the 17 hornet you will not need a 223
but I also believe in want so if you want one that is good enough :drinks:
“If you do not read the newspapers you are uninformed. If you do read the newspapers you are misinformed”. Mark Twain
User avatar
marksman
Colonel
Colonel
 
Posts: 3660
Victoria

Re: Hornet quandry

Post by bigrich » 10 May 2019, 12:58 pm

marksman wrote:IMHO if you go the 17 hornet you will not need a 223
but I also believe in want so if you want one that is good enough :drinks:


That’s my problem MM, I want more than I need or can afford :lol:


:drinks: :drinks: :thumbsup:
User avatar
bigrich
Major General
Major General
 
Posts: 4504
Queensland

Re: Hornet quandry

Post by JimTom » 10 May 2019, 3:59 pm

bigrich wrote:
marksman wrote:IMHO if you go the 17 hornet you will not need a 223
but I also believe in want so if you want one that is good enough :drinks:


That’s my problem MM, I want more than I need or can afford :lol:

Common problem mate. Me too. ;-)
:drinks: :drinks: :thumbsup:
User avatar
JimTom
Second Lieutenant
Second Lieutenant
 
Posts: 2130
Queensland

Previous

Back to top
 
Return to Calibres, cartridges and ballistics