Cost of lighter projectiles in factory ammo

Calibres, cartridges, ballistics tables and ammunition information.

Re: Cost of lighter projectiles in factory ammo

Post by YoungBuck » 24 Jan 2018, 1:13 pm

Oldbloke wrote:Sounds like YB needs to get into reloading...........Am I repeating myself here?

Lol yes I noticed your repetition!
Didn't think I'd need to look at reloading so soon, then again I suppose the sooner I start the sooner the I start saving coin.
Sh*t looking at those numbers you posted it really does make sense to start sooner than later.
Guess I'll start researching. Gonna need a bench in the garage too now, no way the mrs will let me do this in the house.
It'll shoot the fleas off a dog's back at five hundred yards, Tannen, and it's pointed straight at your head!
User avatar
YoungBuck
Corporal
Corporal
 
Posts: 436
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by Oldbloke » 24 Jan 2018, 2:22 pm

You don’t need heaps of stuff to start reloading. Some can be made or purchased second hand
YOU MUST HAVE *
* O or C Frame press-Any 7/8” press, some come with the priming tool - I have a simplex. The "O" is stronger.
* Priming tool
* Shell holder
* Dies- MUST have for each calibre. Lee RGB are the cheapest to get you started. ~$45
* Loading block(s) Easy to make
* Sizing lube- Any heavy oil will do or Lanox
* Powder funnel-Must have one of these.
* Scales. A MUST. Beam or electronic. I have beam. And everyone winges about the lee scales??
* Components, Powder, Primers Projectiles, Cases
* Access to ADI Powder manual-for loading data.
* Manual on how to do it or someone to show you.


OPTIONAL or Can wait a while
Trimmer- I think you need to buy one of these with each cartridge in the lee kit. But a generic one is best. It will do almost any cartridge, most companies sell them. I have a simplex.
Powder scoops-Easy to make
Powder measure. (If you load lots)
Primer pocket cleaner, Easy to make
De burrer, A sharp pocket knife and fine file will do this if you have nothing else
Trickler or very tiny scoop. Easy to make too
Vernier caliper to check case length & OAL. I got away with a dial plastic one for years.
Tumbler, But I use the salt/vinegar solution. Fine for most.
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by Member-Deleted » 24 Jan 2018, 4:51 pm

A 223 with cheap rounds and no recoil, very accurate could of been perfect!
Member-Deleted
 

Re: Cost of lighter projectiles in factory ammo

Post by Oldbloke » 24 Jan 2018, 4:57 pm

Wadogger wrote:A 223 with cheap rounds and no recoil, very accurate could of been perfect!


I agree. But he went 243
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by YoungBuck » 24 Jan 2018, 5:05 pm

The purpose of the .243 was not only to take foxes at ranges beyond the .22 mag but also to be able to handle some larger pests that a .223 might not be recommended for. i.e. pigs. Hopefully sometime this year I intend to try head to NSW to plug some pigs, thus the .243 was the choice, otherwise I'd have gone .223.
It'll shoot the fleas off a dog's back at five hundred yards, Tannen, and it's pointed straight at your head!
User avatar
YoungBuck
Corporal
Corporal
 
Posts: 436
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by Member-Deleted » 24 Jan 2018, 5:12 pm

Thanks oldbloke. Hopefully you shot a few .243”s and research prices before buying.... how much do you shoot for cost to be an issue young buck? 243 is good at burning barrels aswell if you go do a lot of range shooting.
Member-Deleted
 

Re: Cost of lighter projectiles in factory ammo

Post by Oldbloke » 24 Jan 2018, 5:14 pm

Fair enough
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by sungazer » 24 Jan 2018, 5:16 pm

Getting a bit off track again. i was looking at once fired 223 cases and reloading them (which I will still do) but I found the Buffalo River 55 gameking for $50 box of 50 and the Blitzking 55gr for $55 for 50. I couldn't do it for that, and i get the used brass.
sungazer
Sergeant Major
Sergeant Major
 
Posts: 1525
Other

Re: Cost of lighter projectiles in factory ammo

Post by bladeracer » 24 Jan 2018, 6:15 pm

Wadogger wrote:Thanks oldbloke. Hopefully you shot a few .243”s and research prices before buying.... how much do you shoot for cost to be an issue young buck? 243 is good at burning barrels aswell if you go do a lot of range shooting.


If you back the loads down a bit from "full tilt" they should last a bit longer.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 12655
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by Member-Deleted » 24 Jan 2018, 6:29 pm

Might aswell shoot a 223 then.... :sarcasm:
Member-Deleted
 

Re: Cost of lighter projectiles in factory ammo

Post by Oldbloke » 24 Jan 2018, 8:26 pm

Wadogger wrote:Might aswell shoot a 223 then.... :sarcasm:


If he's looking at pigs then bullet weight is a factor.

A starting load in 243 will have more punch than a 223.
Will ease the recoil issue and be a fair bit cheaper
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by YoungBuck » 24 Jan 2018, 9:32 pm

All good gents. Looks like I'll be getting into reloading over the next couple of months.
Don't know for sure but I'm thinking I'll end up with a lighter cartridge that I'd use on bunnies and foxes and probably another, heavier one for targets that need more energy to put them down. Not too fussed about the higher recoil as I don't think I'll be shooting a lot of them in a short bursts. Not to mention the new recoil pad is much more forgiving.
It'll shoot the fleas off a dog's back at five hundred yards, Tannen, and it's pointed straight at your head!
User avatar
YoungBuck
Corporal
Corporal
 
Posts: 436
Victoria

Re: Cost of lighter projectiles in factory ammo

Post by Oldbloke » 24 Jan 2018, 10:39 pm

Then 2206h is probably the powder of choice for you.
It can be used for almost all bullet weights. But also you can use it for reduced loads. You can go down as far as 60% of the max charge. ADI do not recommend going that low with other powders for safety reasons.
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Previous

Back to top
 
Return to Calibres, cartridges and ballistics