Unknown cz stock model

[kransky93]

Hi, can someone please tell me what model this stock is from? Long story short I bought a stock from a gun shop and they had a picture of a 457 stock which is what my model is and they sent me this one? Thanks

[Oldbloke]

Without pulling it apart, looks like my Brno model 2.

[TuskerOrd]

I would also put my money on a Brno Model 2. The 457 is quite distinctive with the recoil lug imbedded at the rear end of the inlet. The Model 2's does not have an action screw at the rear of the action, but they do have one in the middle of the action and then another screw about 3 inches forward of the action under the barrel.

[stihl88]

Looks practically identical to my BRNO model 2 stock, the bolt handle notch on yours is more squared off than mine and the butt plate is thicker on yours also but other than that there's no noticeable difference from the outside.

CZ 457 has only 2 trigger guard screws where as the BRNO Model 2 has 3 as does the CZ 452... I just measured and the the CZ 452 screw spacing is identical to the BRNO model 2 but not sure if they're interchangeable.

[deye243]

Must be a erly mod 2 as it doesn't have that spastic hogs back design.