Hi guys
Just wondering if anyone knew what parts of my action to shorten or modify to adjust for longer cartridge overall length, in 375 Winchester big bore lever gun.
I am aiming to do this to get the bullet closer to the rifling if you know what I need to do i would appreciate your suggestions or know whom I would talk to about achieving this.
I have loaded 245 grain HRBC lead bullet crimped in the last lube/ base groove and this load needs to be single shot but it does not even touch the rifling.
That is a huge throat
The loaded cartridge length is 2.724 inch
Doing this modification will produce two things.
1. Bullet closure to the rifling
2. more room for powder/ verlocity
Thanks Mick