glass bedding

Improving and repairing firearms. Rifle bedding, barrel work, stock replacement and other ways to improve your firearms.

glass bedding

Post by Tilb004 » 02 May 2021, 9:06 pm

Gday All

Interested to know what people out there are using for glass bedding and the release agent .

I have used JB weld 2 pack epoxy and used ballistol as the release agent .
JB weld went well but the ballistol didnt do the job as expected .
I used Ballistol because it seems to stay oily for a long time .

Any advice appreciated .

Tilb
Tilb004
Lance Corporal
Lance Corporal
 
Posts: 116
Western Australia

Re: glass bedding

Post by bigrich » 02 May 2021, 9:17 pm

i use brownells acraglass , the green label stuff , it's not runny like the red label . release agent , a tub of macguires carnuba wax from when i used to do the
hot rod/street machine thing . you can build carnuba wax up to fill threads and recesses :thumbsup:
User avatar
bigrich
Brigadier
Brigadier
 
Posts: 4483
Queensland

Re: glass bedding

Post by Wm.Traynor » 02 May 2021, 9:34 pm

When using JB Weld, boot polish works.
1) Brush on. 2) Allow to dry. Repeat both. I do not polish after repeating. Some do however.
Wm.Traynor
Sergeant Major
Sergeant Major
 
Posts: 1644
Queensland


Back to top
 
Return to Gunsmithing