What grease for my rifle bolt?

[Oldbloke]

"The tubes meantioned are exactly that but cost more because they say "Firearms" ...Same as wedding cakes $20 today, same cake tomorrow but ordered for a wedding $200, lol Orange cap at the ohs shop $3, orange hunting cap at lgs $25, with splash of black paint. Lol a rip off.

Apollo is correct in my view. Any light oil for the most, bearing grease on lugs. Same for shotguns. 90 gearbox oil for case lube. I wash parts in diesel, because it leaves an oily coat on the metal.
"

[Lorgar]

Bought my dog a new stainless steel bowl the other day.

"bowl" from the bargain shop $6.

"pet food bowl" from the pet store $28.

Literally the exact same bowl.

[Oldbloke]

Pet bowl would arrive from china for .60 cents..lol

[petemacsydney]

thats a lot of pet bowls mate

[Aster]

Doing it's funny duplicate post thing for oldbloke again. Can't work that one out so far.

Deleted the extras.

[kritch]

I use an oil, tetra spray on stuff. It's bloody awesome. 2 quick sprays and it lasts a month or so

Just got a can of this myself. Good to read the thumbs up.

[Brucey4409]

Hey buddy, I'd recommend molybdenum disulfide, easiest way is to grab a aerosol can of "molybond".

Clean your bolt down and wipe it dry, then spray on a nice even coat on the body (not the face) of the bolt.

Any dry film lubricant will probably work but I've run tests on this product with a group of assault rifles and it stood up to 1000's of rounds of rapid fire with good results.

I'd avoid a silicone based spray though, could spell disaster if you ever try and cerakote your rifle.

[disko]

Any dry film lubricant will probably work but I've run tests on this product with a group of assault rifles and it stood up to 1000's of rounds of rapid fire with good results.

Sounds fun

Army stuff I guess Brucey?

[Brucey4409]

Nah, just a trivia night that went pear shaped

Yeah it was a trial to test new lubrication methods to cut down on stoppages in the desert caused by sand ingress.

[petemacsydney]

Castol Moly for me.

Any car supplies place. Super Cheap Auto, Bunnings maybe?

is this ok?

couldnt find castrol moly ;-(

moly1.jpg (927.84 KiB) Viewed 6262 times

[disko]

Nah, just a trivia night that went pear shaped

Ha ha.

[SendIt]

is this ok?

I haven't used the Penrite brand specifically but that's the right stuff.

Like I said, I only went with the Castrol because a mechanic mate gave me the tub, not because it's specifically better for any reason.

Should be fine

[petemacsydney]

cool, thx mate

i reckon it will take me about 60 years to get through that tub!!!

[SendIt]

Yep, it'll last you

[Warrigul]

Lots of opinions on grease on bolts, and as in any internet subject there is a bit of sheeple effect. With my Target rifles I always grease the backs of the lugs and the cocking cams as these are subject to wear and lots of rounds. However after 4783 rounds my mates rifles has suffered only minimal wear(read a bit of polishing) and is still firm on the GO guage.

You can draw your own conclusions, but he has only ever kept the bolt clean and lightly oiled with Inox oil.

I suppose it could be said that if you keep the firearm clean and oiled and inadvertently forget to grease the sky won't fall in anytime soon, often the lugs need to wear in a little anyway or knock some of the machining irregularities off, many gunsmiths lap them in.

By all means grease lugs but make sure you also regularly clean that area out as grease plus grit equal grinding paste and that is something most people would wish to avoid.

If you are a hunter and get rubbish in your gear regularly then a good clean and oil may well suffice(this is all I do) especially if you full length size or use factory loads as the strain when loading and extracting is often minimal.

We have brains and should use them, just my humble opinions.

Oh and I hate moly or graphite grease as the ****** gets everywhere. I save it for the double cardian and swivel joints on the Hilux, I only use Wynn's Supreme(as I have for 20 plus years on anything subject to extreme wear).

[petemacsydney]

how do you guys clean the lug area inside the action? i've tried to stick my finger in wrapped in some cotton material, but find it very hard to clean effectively. its not really dirty, as i take good care of the rifle, but i'm sure there is a better more efficient way to do it ?
maybe a spray solution with pipe extender would be a better way to approach it?

[Apollo]

Pete, you can buy special little brushes designed for cleaning the chamber / locking lugs. Like little tooth brushes with brissle's on the side. BRT for one.

I don't like moly or graphite grease either, it's too dirty if you get it on things. As I said earlier, high presure / extreme grease is all that is required and a very small amount at that like a tiny dab on a cotton bud. I like the tubes like seringe that you can squeeze a tiny amount out of the end and smear it with it's own tip. Saves
a lot of mess and easy to carry in the cleaning kit.

[petemacsydney]

sounds good. can you link me?
couldn't find any on google ;-(

[Apollo]

BRT....

Action kit...

http://www.benchrest.com.au/riflecleani ... mber-tools

High Pressure Grease Syringe... Pro Gold Bolt Lube

http://www.benchrest.com.au/riflecleani ... ng-patches

Also the Bore-Tech is available from HSS .... Same thing, high pressure grease, I have both so one at home one in the kit for out and away.

[Warrigul]

how do you guys clean the lug area inside the action? i've tried to stick my finger in wrapped in some cotton material, but find it very hard to clean effectively. its not really dirty, as i take good care of the rifle, but i'm sure there is a better more efficient way to do it ?
maybe a spray solution with pipe extender would be a better way to approach it?

My whole extended family save their old toothbrushes for me, usually there is an area that is virtually un worn and the rest of the brush can be trimmed to fit, I also use compressed air and a precision needle air gun, being careful to clean the bore after.

[jackles]

Toothbrush here also.

And a straight and one curvy rod I can wrap a bit of patch around to get into places.