I'm building a 25-303 Epps on an Eddystone P14 and am in need of a chamber reamer. I'm looking for someone that would be willing to sell or hire out the reamer. The clambering will be performed by a Gunsmith.
Thanks
Varmtr wrote:310-303
Ok another Epps conversion, I'm doing a 6.5 Epps on a Win P14. Hopefully in the next month or so down to Luke at ProCal to do his magic.
Anyway back to you. A 303-25 Epps reamer here in Aus would be rarer than rocking horse ******. Your best bit is to email Dave Manson from Manson Reamers, this were I got mine from. From all my research over the years the Epps chamberings changed slightly here and there depending on the gunsmith doing the job.
Dies will need to be custom made, Dave will send you a blue print of the reamer and as it is a custom you can change it if you want. With this blue print send it to CH4D and they can make to dies to suit.
Varmtr wrote:Cost was $236 US including shipping with a floating pilot.
Andrewgsxr1127 wrote:Hi there, did you manage to find someone with a reamer for the 303 25 epps. i am interested in doing the same work on a Mauser 98 I have chambered in 303 25
Regards Andrew