sungazer wrote:I have but its not what I was after. I bought a spring kit I will find a link and post it for you. I went through a few different combinations of the springs as I like the two stage and with both the springs the first stage was too easy and with adjustment it tuned into a single stage and at one point it was also dangerous with it going off on a hard bolt close ect. Anyway I found the spring combination that gave me the longest first stage pull to a point then it would break crisp and sharp. I used one original and one new spring in the end.
Rikta wrote:sungazer wrote:I have but its not what I was after. I bought a spring kit I will find a link and post it for you. I went through a few different combinations of the springs as I like the two stage and with both the springs the first stage was too easy and with adjustment it tuned into a single stage and at one point it was also dangerous with it going off on a hard bolt close ect. Anyway I found the spring combination that gave me the longest first stage pull to a point then it would break crisp and sharp. I used one original and one new spring in the end.
sheesh couldn't think of anything worse than purposely putting creep on a trigger, can not in any way see the appeal of having all that extra travel and therefore torsional movement to account for, even my archery releases are as sensitive and haired off as they can be.
but yes please do find me the link, would be greatly appreciated... cant stand how long of a pull it has before you get to the sear. and have been putting off buying a $200+ timney for it.
marksman wrote:buy a better trigger with creep adjustment
the older howa triggers are a much better fully adjustable trigger
or you can cut the hact spring a little at a time to adjust, utube is your friend
give it a go and if it dont work out buy a better trigger
I think they hact these triggers I dont like them
Gwion wrote:Cutting springs is dodgy.
Glen will set the trigger to your specs. In my case 2lb break no creep at all.
Gwion wrote:He'll go to 8oz as far as i know.....
Rikta wrote:Gwion wrote:He'll go to 8oz as far as i know.....
sweet anyone got contact info for him aside from fb? i dont do fb