Anybody got one I could buy ???

Equipment and accessories for shooting. Safes, firearm storage, bipods, carry cases, slings etc.

Anybody got one I could buy ???

Post by Die Judicii » 12 Jul 2017, 7:51 pm

Am looking for a timber stock to suit a Zastava Model 91, .375 H+H Magnum.

I'd prefer a chequered stock if at all possible.

I don't care about the condition of the finish,,,, as long as there are no cracks, fractures or deep dings.

Can someone help me out here

:unknown: :unknown: :unknown:
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 12 Jul 2017, 9:25 pm

You could probably pick one up new from importers through your local. Zasty parts aren't expensive!

Also look at the CZ/Brno option. I think they are pretty much the same action as Zasty is the copy. Might want to double check that as I could be mistaken.

I was looking on 'the barn' website today and they had quite a selection of second hand stocks. Might be worth a look.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Die Judicii » 12 Jul 2017, 10:05 pm

Thanks Gwion,
I will send an enquiry to Beretta.
The Barn doesnt have anything listed that suits.

In the meantime if any other members have one,, please let me know.

Cheers :thumbsup:
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 12 Jul 2017, 10:33 pm

No worries. Hope you find one.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Die Judicii » 18 Jul 2017, 7:26 pm

Seems like the old "game" of "Pass the buck" is alive and well.
I've been shuffled through 6 of the dealers, agents, and reps that I was advised to contact, starting with Beretta Aust and ending with Qld Gun Exchange.



Edit : I stand corrected,, I checked my emails again, and lo and behold there was a response from QGE
They are in turn waiting for a reply to say whether or not the correct one can be obtained, and a price.
Last edited by Die Judicii on 18 Jul 2017, 7:49 pm, edited 1 time in total.
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by yoshie » 18 Jul 2017, 7:28 pm

Mauser 98 stocks should fit
User avatar
yoshie
Sergeant
Sergeant
 
Posts: 641
Australian Capital Territory

Re: Anybody got one I could buy ???

Post by Die Judicii » 18 Jul 2017, 7:51 pm

yoshie wrote:Mauser 98 stocks should fit


Should or will ?

Mebbe I'll check that out too.
I gather Mauser would be more readily obtained, and trial fit.
Thanks, :thumbsup:
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 19 Jul 2017, 5:27 am

Do you have an old stock for it?

Maybe contact Trekin. He has a stock copying service. He may be able to help.

Sucks that you can't get any service!!!
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Daddybang » 19 Jul 2017, 5:40 am

Gwion wrote:Do you have an old stock for it?

Maybe contact Trekin. He has a stock copying service. He may be able to help.

Sucks that you can't get any service!!!


Hey gwion do you have contact details . A mate has an old survival rifle from the 1940s with a bakerlite? stock that he wants to swap out so he can put the original away to prevent it getting damaged thanks for any info :thumbsup:
This hard living ain't as easy as it used to be!!!
Daddybang
Second Lieutenant
Second Lieutenant
 
Posts: 2012
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 19 Jul 2017, 5:51 am

He is a member here so just search members and send him a pm. I have his email but won't post it without his permission. He copies stocks in timber or laminated bamboo.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Daddybang » 19 Jul 2017, 6:07 am

No worries I'll find him and shoot him a message. Thanks :thumbsup:
This hard living ain't as easy as it used to be!!!
Daddybang
Second Lieutenant
Second Lieutenant
 
Posts: 2012
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 19 Jul 2017, 6:14 am

All good!
Can you get any pics of the old Bakelite rifle? It sound interesting.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Daddybang » 19 Jul 2017, 6:24 am

Yeah he should be up in a couple of weeks will post then. Sorry for the hijack of ya thread D.J
This hard living ain't as easy as it used to be!!!
Daddybang
Second Lieutenant
Second Lieutenant
 
Posts: 2012
Queensland

Re: Anybody got one I could buy ???

Post by Die Judicii » 19 Jul 2017, 1:08 pm

Daddybang wrote:Yeah he should be up in a couple of weeks will post then. Sorry for the hijack of ya thread D.J


:D :thumbsup: Thats OK Mate,,,,,,,,,,, I think we are all learning something here.


GWION,,,,,,,,,,,, Yes Mate, I have the stock it came with, except it's bloody synthetic,,,, and a slippery one at that.
If you don't consciously hang on like grim death it can literally jump out of your hands.

I let a friend have a shot one day (after me saying it's a slippery sucker), and it got away on him.
I managed to catch it just before it bit the dust.

Would those stock replicating machines be able to copy the synthetic stock ?
There are lots of cavities and channels inside the plastic.
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Oldbloke » 19 Jul 2017, 6:46 pm

If the stock being slippery is the key reason your looking can't some sort of "grippy rubber "
Be glued to the stock?
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria

Re: Anybody got one I could buy ???

Post by yoshie » 19 Jul 2017, 7:06 pm

Die Judicii wrote:
yoshie wrote:Mauser 98 stocks should fit


Should or will ?

Mebbe I'll check that out too.
I gather Mauser would be more readily obtained, and trial fit.
Thanks, :thumbsup:


Zastavas are a Mauser 98 clone, there are a few difference such as scope mounts, any large Magnum Mauser action stock should fit or be close enough with a small amount of work be made to fit. There are alot if copies of Mauser actions so there is alot of variations some stock dont have trigger cut outs or bolt cut outs, they need to be put in to suit. I'd look around for a Boyds or Hatchers or similar. Boyds are hard to get now, Hatchers make some good stocks, I'm sure they would know what will fit.
User avatar
yoshie
Sergeant
Sergeant
 
Posts: 641
Australian Capital Territory

Re: Anybody got one I could buy ???

Post by Die Judicii » 19 Jul 2017, 8:58 pm

yoshie wrote:
Die Judicii wrote:
yoshie wrote:Mauser 98 stocks should fit


Should or will ?

Mebbe I'll check that out too.
I gather Mauser would be more readily obtained, and trial fit.
Thanks, :thumbsup:


Zastavas are a Mauser 98 clone, there are a few difference such as scope mounts, any large Magnum Mauser action stock should fit or be close enough with a small amount of work be made to fit. There are alot if copies of Mauser actions so there is alot of variations some stock dont have trigger cut outs or bolt cut outs, they need to be put in to suit. I'd look around for a Boyds or Hatchers or similar. Boyds are hard to get now, Hatchers make some good stocks, I'm sure they would know what will fit.


Cheers, :thumbsup:
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Die Judicii » 19 Jul 2017, 9:00 pm

Oldbloke wrote:If the stock being slippery is the key reason your looking can't some sort of "grippy rubber "
Be glued to the stock?


I never was a fan of synthetic much,,, and prefer good timber any old day.
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 19 Jul 2017, 9:26 pm

Can't see any reason why a synthetic stock can't be replicated. I'm sure Trekin will let you know.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Anybody got one I could buy ???

Post by Die Judicii » 20 Jul 2017, 10:13 am

Yeah Mate,
He is busy for a few days, but will discuss it with me when he gets back.

Thanks for the tip/intro
:thumbsup: :friends:
I do not fear death itself... Only its inopportune timing!
I've come to realize that,,,,, the two most loving, loyal, and trustworthy females in my entire life were both canines.
User avatar
Die Judicii
Colonel
Colonel
 
Posts: 3706
Queensland

Re: Anybody got one I could buy ???

Post by Gwion » 21 Jul 2017, 8:40 am

:thumbsup: good stuff!
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-


Back to top
 
Return to Shooting accessories and equipment