groundhog wrote:Attached is the A4 for the RMS targets. They are all on one page which I usually staple it to a box and just move up and down the range.
groundhog wrote:These are for the scope matches I have different targets for CLAS.
perentie wrote:I am trying to find the plans for half size chicken , pigs, turkeys and rams with inch squares that I can print off then scale up by hand on cardboard to give to my metal shop. I need to get a quote for our club so we can start field pistol. Gives us an excuse to buy 44,s 45,s etc.
Any ideas?
Aliqua wrote:Can anyone link to a good template for long range 308 targets? What is acceptable at the more popular ranges such as eagle park? Thanks!
John wrote:Looks like I’m off to the shops for printer ink I’m out just tried to print a few different ones there off thank for putting them together I’m sure there a lot here that will appreciate them.
Sarco wrote:https://www.ihmsa.org/targets/
The above was posted on another forum, so I have misappropriated it.
Editted and added - International Handgun Metallic Silhouette Association - Printable silhouette targets
Sarco
groundhog wrote:Attached is the A4 for the RMS targets. They are all on one page which I usually staple it to a box and just move up and down the range.
bladeracer wrote:perentie wrote:I am trying to find the plans for half size chicken , pigs, turkeys and rams with inch squares that I can print off then scale up by hand on cardboard to give to my metal shop. I need to get a quote for our club so we can start field pistol. Gives us an excuse to buy 44,s 45,s etc.
Any ideas?
I have the drawings I can send you. They're full-size on one-inch grid. I basically mark out the grid (at whatever scale I'm making - one-inch, half-inch, three-eighths, fifth, and tenth scale) only where I need to draw, then just sketch them in freehand straight off the computer screen. I haven't bothered trying to print them at any scale. Once I've made a template I just cut them out of copy paper ten pages thick, and file them away.
PM me your email address and I'll send them through.
EDIT: These are the ones I use - https://www.ebay.com.au/itm/1-2sc-IHMSA-NRA-Metallic-Silhouette-Targets-4pc-AR500-Steel-Rifle-Knock-overs-/261052417780
Aliqua wrote:Disclaimer: I have no experience in designing targets, or designing for a specific purpose. But during this 'down time', I had a look at some MIL/MRAD templates (all imperial measurements), and wanted to give it a go in metric... so i made a 25, 50, 100, 200m sighting in target template for MIL/MRAD scopes. When printed, the squares are exactly 10mm, and I have put visual guides that i hope can be read through the scope as to how many squares/mm away from the bullseye. Furthermore, I did these targets at night, so I dont know if i got the calculations correct at the top.
I would appreciate any feedback and happy to make the required changes to make this something a little more appropriate/acceptable.
I tried to upload the .docx but the file is not allowed. In the instance that anyone would like this template, your welcome to PM me and I'll send the .docx
The JPEG is just for preview. It is NOT to scale. If you want the scaled version, download the PDF attachment.
bladeracer wrote:Aliqua wrote:Disclaimer: I have no experience in designing targets, or designing for a specific purpose. But during this 'down time', I had a look at some MIL/MRAD templates (all imperial measurements), and wanted to give it a go in metric... so i made a 25, 50, 100, 200m sighting in target template for MIL/MRAD scopes. When printed, the squares are exactly 10mm, and I have put visual guides that i hope can be read through the scope as to how many squares/mm away from the bullseye. Furthermore, I did these targets at night, so I dont know if i got the calculations correct at the top.
I would appreciate any feedback and happy to make the required changes to make this something a little more appropriate/acceptable.
I tried to upload the .docx but the file is not allowed. In the instance that anyone would like this template, your welcome to PM me and I'll send the .docx
The JPEG is just for preview. It is NOT to scale. If you want the scaled version, download the PDF attachment.
It looks good but I prefer diamonds rather than squares.
I aim at the intersections of the fine lines for precision, but I'm leaning toward printing my next targets with a 45-degree grid so the lines are not obscured by the reticle.
Aliqua wrote:Sarco wrote:https://www.ihmsa.org/targets/
The above was posted on another forum, so I have misappropriated it.
Editted and added - International Handgun Metallic Silhouette Association - Printable silhouette targets
Sarco
Link not found.
I'm going to have a play in photoshop tomorrow and do some metric scaled (A4 - 10mm / 100mm scale) targets and upload them. Feedback would be appreciated.
Aliqua wrote:Thanks Bladeracer. I did it in word, and I don't know how to do diamonds, but I'm more than happy to try!