Mosin Nagant

[bladeracer]

G'day bladeracer,
Keep all your S&B cases, you're going to need them. The brass they use does not reload very often, I've had some only take 3 loads. Your most cost effective option is PPU ammo, then reload the brass, Cheers.

That's interesting.
I'm using S&B and Hornady in 8x57mm and I have noticed the S&B does seem to stretch more than the Hornady, although not enough to need resizing so far.

[juststarting]

Eh! Matching numbers and everything!

http://m.usedguns.com.au/Product_Desc.aspx?Pid=85055

[Supaduke]

A model 1930 Mosin nagant made in 1927....... that's different
And $300 over market value for a crappy paint job that used about $15 worth of spray paint.

May have been sniffing a bit of that paint methinks

[bladeracer]

A model 1930 Mosin nagant made in 1927....... that's different

Just means it was a refurbished Dragoon '91 brought up to 91/30 spec.

[Garth]

Accumounts make a pu scope got one you will need to have the bolt turned down.then stock cut away to fit scope mount don't do it keep it as is ammo easy to get .reload I do 46Gn of 2208 150 Gn 308 prodjys

[bladeracer]

Accumounts make a pu scope got one you will need to have the bolt turned down.then stock cut away to fit scope mount don't do it keep it as is ammo easy to get .reload I do 46Gn of 2208 150 Gn 308 prodjys

Yeah, I don't think I'll need a scope on it
Ammo is easy to get?
From where?
I eventually found some but it was far from "easy".
What velocity does that load give you?
Do you have a .308 or .311 bore?
Mine slugs at .3110"