Show me your milsurps

[juststarting]

Ta

[wrenchman]

cz52 a investment gun

[lole]

7.62×25mm Tokarev, old school.

[wrenchman]

yes it is i dont shoot it much i have stuff to shoot that dont cost as much when i do.
i only paid 90 us dollers for it with the holster and cleaning rod .
the gun is very slim and a brute to shoot

[bladeracer]

Put a few rounds through my milsurps this arvo.

M91/30 Mosin Nagant 7.62x54R
M38 Mauser (Husqvana) 6.5x55mm
M1904/39 Portuguese Mauser 8x57mm
No.4 Mk1* (Longbranch) .303
M91/38 Short Rifle 6.5x52mm Carcano

.264" 160gn Hornady RN actually work okay in the Carcano pushing just under 2000fps, but I'm still getting brass .268's made for it.
100gn XTP's are making 3325fps out of the Mosin, but I'm only pushing them at 2650fps out of the No.4 Rifle.
I only shot cast 180gn 1100fps loads out of the 8x57mm today, damn they were nice after the full-power loads through the other four

[No1Mk3]

G'day wrenchman,
Marvellous handgun the CZ52, love the roller locking set up. Just to show how hard done by we are in a much smaller and heavily regulated market I bought the same pistol, 2 mags and perfect holster last month for $700.

[No1Mk3]

G'day bladeracer,
What year is your Longbranch? Does it have the Mk1 Action Body, (bolt release spring at rear)? Have never seen a stacking swivel on a No4 before either, Cheers.

[Supaduke]

Cool pistol
Cool rifles

[wrenchman]

my m44 the son took over

[wrenchman]

no1 thet have gone up they are running about 300 now

[wrenchman]

a remington 513t matchmaster stamped us property my father inlaw got fom the cmp

[bladeracer]

a remington 513t matchmaster stamped us property my father inlaw got fom the cmp

I put the same US ARMY stock on my father-in-law's 510, plus ten-round mag to make it a repeater

[wrenchman]

its hard to see in the pic mine has peep sights what typ of scope you have on that

[bladeracer]

its hard to see in the pic mine has peep sights what typ of scope you have on that

Just a $60 Chinese Bushnell. I was trying to get it to shoot so I epoxied a dovetail onto the reciever. I also tried AR15 sights on it. Ended up putting the barreled action in a vice and it still wouldn't group.
I'm going to try some jacketed .224 bullets next, but I think I'm going to have to chase up a cheap 10/22 barrel for it. If I can get it to shoot I will be putting peep sights on it.

[Gun-nut]

20161222_091819.jpg

From the top:
Mauser 1871
French Gras
Winchester 37
Snider
Greener GP.
all in 12ga like real guns.

Mate...that's impressive! What more can you tell us about that "Greener GP", looks like a converted Martini Henry.

[duncan61]

I had a greener in 12ga .The 450/577 Was in their same set up aka Zulu war movie

[Gun-nut]

Greener made a whole bunch of martini actions from the little .310 cadet rifles right up to harpoon guns .
The GP's like mine where made for cheap farm guns but higher grade trap models where made as well. The were used by the US coast guard at one stage too, which is why i included it here.
They also made a 12-14ga with a special necked down case for prison guards and colonial use, idea being if they got snatched or turned against their colonial masters normal shotsells wouldnt fit quickly rendering them useless.

Mate that's awesome, thanks for the run down on the history. I might have to pick one up myself one day.

[Title_II]

This is all I got that's mil.

[Title_II]

Oops! I forgot, I got a 1919A4 but no pic. It's a semi, though.

[Gun-nut]

Mate that m16 is absolutely beautiful! Is it authentic? (As in full-auto) because the selector switch seems to indicate that it is. Either way she's a beaut.

[Title_II]

Thanks. Yeah, it's the real deal. Easy way to tell is by the sear pin over the selector.

[Supaduke]

Very nice! Worth quite a few dollars a genuine M16. Nice investment.

[No1Mk3]

MkIII Greener Police Cartridge, showing groove allowing 3 prong striker to fire, which would not work on conventional ammo.

[Supaduke]

Any more info on how the three prong striker works? Very interesting bit of history.

[Supaduke]

And in some good news, I finally picked up my Finn and Russian. Haven't had time to get a proper look at them yet. Initial inspection seems to be excellent. I will get them cleaned up and take a few photos. The M39 really is quite a beautiful rifle. Got some nice character in the stock and the metal work and rifling is mint.

[No1Mk3]

G'day Supaduke,
To reduce criminal misuse of the gun, it was fitted with a firing pin in the form of a trident with all 2 outside tines the same length and the center firing pin slightly shorter or sometimes the same length. Upon contact with the flat base of a conventional shell base the firing pin would be prevented from striking the primer. The diameter and depth of the groove allowed the striker to hit the primer. It was a good idea, but so easy to overcome. Will you be increasing your Vodka intake, by the way? You should get a lot of joy from your Ukko Pekka!

[Supaduke]

Thanks no.1 , very interesting.

Here's the new toys. I will do another thread with a few more photos

M39 and 91/30

IMG_0252.JPG (1.12 MiB) Viewed 7032 times

[juststarting]

Thought I'd post something different. I could post a pic of couple of Mosins... But everyone knows what they look like. I am pretty happy i managed to track down actual Mosin clips with factory stamps, because I am OCD like that.

[Supaduke]

Nice one. I bought some Chinese ones that are ******. From the few I've tried, they don't work. Thankfully they only cost me about $6 for 10. Very tight in the clip slot and refuse to feed rounds.

[Miami_JBT]

Span-Am War and Philippines Insurrection

Colt New Service in .45 Colt





Krag 1896 Carbine



Krag 1898 Rifle