1sikxt wrote:Hey guys just wondering what product people are using to clean copper and carbon build up in rifles I've just ordered some wipe out patch out + accelerator has any one had much to do with this product also like to hear what everyone else is using
bladeracer wrote:1sikxt wrote:Hey guys just wondering what product people are using to clean copper and carbon build up in rifles I've just ordered some wipe out patch out + accelerator has any one had much to do with this product also like to hear what everyone else is using
I bought some Outers Nitro Solvent Gun Cleaner specifically to clean the bore of my father-in-law's Remington 510 - he was certain it was fouled up from never having been cleaned.
It works as well as I could expect any bore cleaner to so I've stayed with it for all my firearms, except blackpowder. Rarely do I need to use a brush to clean the bores, less than ten patches is usually sufficient.
For blackpowder I'm using Hornady's One Shot Muzzle Loader Cleaner.
Wm.Traynor wrote:1sikxt
Congratulations on being able to get Wipeout Never been able to get it myself. Patch out with carbon remover until they come out pretty clean. Squirt carbon cleaner/solvent on a bronze brush and stroke the bore, one stroke for every shot fired. Patch out. Apply copper solvent to the bore to remove jacket fouling and brass from the bronze brush. Do not use a brass jag. Squirt the solvent into the bore with a syringe and rubber hose. A tight bristle brush is OK
Any brand you like. I forget what I use