CZ527 carbine 7.62x39

Bolt action rifles, lever action, pump action, self loading rifles and other miscellaneous longarms.

Re: CZ527 carbine 7.62x39

Post by Gwion » 09 Jul 2017, 7:22 am

I'd personally just load up 15 at 28.3 and confirm with 3 groups of 5. Looks consistent through that range where as other loads spread on either side, if that makes sense. This should give you a little leeway for changes in conditions or 0.2 grain variation in charge.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by Dexer » 09 Jul 2017, 10:03 am

Looks brilliant.

Can you see the front sight through the scope? I had that on a rifle once and found it really distracting.

I do love these firearms...
Dexer
Recruit
Recruit
 
Posts: 39
Victoria

Re: CZ527 carbine 7.62x39

Post by SHV » 09 Jul 2017, 8:06 pm

Gwion wrote:I'd personally just load up 15 at 28.3 and confirm with 3 groups of 5. Looks consistent through that range where as other loads spread on either side, if that makes sense. This should give you a little leeway for changes in conditions or 0.2 grain variation in charge.


good idea, will try, thanks
also will try trail boss, I don't know why the reloads drop few cm compares to the factory ammo and looks like it stay there no matter how much powder loaded, maybe it is due to the different projectile or maybe the 8208 burning rate is too slow for the 7.62x39, especially for the sort barrel carbine?
Last edited by SHV on 09 Jul 2017, 8:13 pm, edited 1 time in total.
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 09 Jul 2017, 8:08 pm

Dexer wrote:Looks brilliant.

Can you see the front sight through the scope? I had that on a rifle once and found it really distracting.

I do love these firearms...


thanks

low power (2x) yes you can see the front sight
high power (7x) can not see it or it is not that easy to see...
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by Milsurp98 » 09 Jul 2017, 8:30 pm

SHV wrote:
Gwion wrote:I'd personally just load up 15 at 28.3 and confirm with 3 groups of 5. Looks consistent through that range where as other loads spread on either side, if that makes sense. This should give you a little leeway for changes in conditions or 0.2 grain variation in charge.


good idea, will try, thanks
also will try trail boss, I don't know why the reloads drop few cm compares to the factory ammo and looks like it stay there no matter how much powder loaded, maybe it is due to the different projectile or maybe the 8208 burning rate is too slow for the 7.62x39, especially for the sort barrel carbine?


Try AR2207. 8208 is not even listed in my manuals or the ADI website.
Milsurp98
Recruit
Recruit
 
Posts: 16
Queensland

Re: CZ527 carbine 7.62x39

Post by Gwion » 09 Jul 2017, 8:41 pm

I wouldn't be too worried anout that different POI. As lol Ng as it is consistent and you can learn its drops. If it is s concern, as above, try a different powder.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by SHV » 09 Jul 2017, 9:27 pm

Gwion wrote:I wouldn't be too worried anout that different POI. As lol Ng as it is consistent and you can learn its drops. If it is s concern, as above, try a different powder.

do you think TB will be a good idea for 7.92x39? this rifle is just for short/light, low recoil, mild ammo 30 cal, for hard hitting and long range I've got 308 A7 and 30-06 battue :lol:
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by Gwion » 09 Jul 2017, 9:43 pm

Dunno. Try it and find out. What would you use the TB loads for?
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by SHV » 09 Jul 2017, 10:23 pm

Gwion wrote:Dunno. Try it and find out. What would you use the TB loads for?

plinking maybe :lol: TB223 probably for 100 meter rabbits, BT 762x39 maybe for anything not dangerous :lol: :lol: :lol:
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by in2anity » 10 Jul 2017, 12:23 pm

SHV wrote:also will try trail boss, I don't know why the reloads drop few cm compares to the factory ammo and looks like it stay there no matter how much powder loaded, maybe it is due to the different projectile or maybe the 8208 burning rate is too slow for the 7.62x39, especially for the sort barrel carbine?


Factory powder is mystical magical stuff - FWIW my 30/30 seems to boot a lot harder with factory ammo compared to (MAX) handloads of a variety of powders (i.e. 2208,2207,2206), I always wondered why...

Trail boss will be perfectly safe mate, just don't compress it. Give it a go and post your results; I'd love to see how she handles it! If it's accurate, it'll be capable of taking down bigger game than rabbits...
At what point does lack of maintenance become patina?
User avatar
in2anity
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3048
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 10 Jul 2017, 4:19 pm

in2anity wrote:
SHV wrote:also will try trail boss, I don't know why the reloads drop few cm compares to the factory ammo and looks like it stay there no matter how much powder loaded, maybe it is due to the different projectile or maybe the 8208 burning rate is too slow for the 7.62x39, especially for the sort barrel carbine?


Factory powder is mystical magical stuff - FWIW my 30/30 seems to boot a lot harder with factory ammo compared to (MAX) handloads of a variety of powders (i.e. 2208,2207,2206), I always wondered why...

Trail boss will be perfectly safe mate, just don't compress it. Give it a go and post your results; I'd love to see how she handles it! If it's accurate, it'll be capable of taking down bigger game than rabbits...


will update once get chance to try, full capacity for 762x39 case is 10.0 Gr TB, I‘ll try 8.8---9.1---9.4---9.7---10.0’ these 5 groups, best accuracy should be around 9.4, will see :lol:

IMG_3213_副本.jpg
IMG_3213_副本.jpg (399.55 KiB) Viewed 5681 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 10 Jul 2017, 6:48 pm

Gwion wrote:I wouldn't be too worried anout that different POI. As lol Ng as it is consistent and you can learn its drops. If it is s concern, as above, try a different powder.


my SAKO A7 308 looks alright, the POI almost the same for the factory hunting ammo, factory target ammo and reload, the bad thing is maybe the barrel is too good, reloading test looks like the same, hard to tell which is the best point, any idea? which load I should try? maybe 42.5 gr?

IMG_3198.JPG
IMG_3198.JPG (450.45 KiB) Viewed 6065 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by duncan61 » 10 Jul 2017, 6:56 pm

I remember doing all this for my rifles.222 .243 and 7mm Rem Mag.I have standard loads now its worth the effort to know your rounds are on point.Love your work its what this forum is all about
.22 winchester .22hornet .222 .243 7mm rem mag cbc 12g
User avatar
duncan61
Officer Cadet
Officer Cadet
 
Posts: 1905
Western Australia

Re: CZ527 carbine 7.62x39

Post by Gwion » 11 Jul 2017, 6:26 am

Hard to say. What range are those groups shot at?
Maybe try 3x5 each of 2nd from left top and 3rdfrom left bottom (on my phone hard to read charge weights).
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by SHV » 26 Jul 2017, 10:40 pm

the best factory ammo 5 shot(indoor 50 meters), S&B ammo is good but different batch performs different, the plastic divider in the ammo box white color batch is much better than the green color ones

IMG_3281.JPG
IMG_3281.JPG (396.84 KiB) Viewed 6233 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 26 Jul 2017, 10:49 pm

TB load, 10.0---9.6---9.2---8.8---8.4--8.1, at max load it spreads a lot, getting better at 8.1, seems nearly there, next time try 7.9---7.7---7.5 each 5 shot to find out, the good thing is POI didn't change too much compares to factory ammo

IMG_3282.JPG
IMG_3282.JPG (337.01 KiB) Viewed 6232 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by MickW » 28 Jul 2017, 8:12 pm

No1Mk3 wrote:Dear MickW,
I am sorry to hear your vacillation regarding 30/30 lever or 7.62x39 bolt is causing hardship, so may I offer a way to ease your suffering that I have used for many years? Find a quiet spot near your gunsafe, assume the Lotus Position, close your eyes and repeat, "I can have BOTH...I can have BOTH...I can have BOTH" before you know it, you will be at peace.


Cheers Mk3 its worked. The Howa Mini is ready for pickup tomorrow. :drinks:
MickW
Recruit
Recruit
 
Posts: 5
New South Wales

Re: CZ527 carbine 7.62x39

Post by duncan61 » 29 Jul 2017, 12:20 am

Did you read Elmers post on sorting runout on factory ammo
.22 winchester .22hornet .222 .243 7mm rem mag cbc 12g
User avatar
duncan61
Officer Cadet
Officer Cadet
 
Posts: 1905
Western Australia

Re: CZ527 carbine 7.62x39

Post by SHV » 10 Aug 2017, 12:20 am

Trail Boss test

7.9gr, 7.7 gr and 7.5 gr

seems 7.7 is good but got one fly and it's far away from the main group cluster :oops: next time will try 10 x to find out if it's the best

IMG_3429.JPG
IMG_3429.JPG (409.92 KiB) Viewed 6175 times


IMG_3430.JPG
IMG_3430.JPG (459.93 KiB) Viewed 6175 times


IMG_3431.JPG
IMG_3431.JPG (468.42 KiB) Viewed 6175 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by in2anity » 10 Aug 2017, 12:21 pm

Nice SHV - remember TB isn't renowned for it's pinpoint accuracy. It's advantage comes from its economy and less wear-and-tear on your rifle.
At what point does lack of maintenance become patina?
User avatar
in2anity
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3048
New South Wales

Re: CZ527 carbine 7.62x39

Post by Gwion » 10 Aug 2017, 2:42 pm

Not sure what primers are used in that cartridge but I definitely found that using Small Rifle MAGNUM primers for Trail Boss in my 223 improved consistent velocity as well as precision and group size. In fact, I literally just finished priming 50 cases with SRM primers for a fresh batch of TB 223rem.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by SHV » 10 Aug 2017, 4:03 pm

in2anity wrote:Nice SHV - remember TB isn't renowned for it's pinpoint accuracy. It's advantage comes from its economy and less wear-and-tear on your rifle.


reasonable accuracy will be ok, it is fun to shoot
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 10 Aug 2017, 4:06 pm

Gwion wrote:Not sure what primers are used in that cartridge but I definitely found that using Small Rifle MAGNUM primers for Trail Boss in my 223 improved consistent velocity as well as precision and group size. In fact, I literally just finished priming 50 cases with SRM primers for a fresh batch of TB 223rem.


is there large rifle magnum primer you can buy for LGS? also do you need to enlarge the hole on the case?
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by Gwion » 10 Aug 2017, 5:33 pm

No you don't have to enlarge anything. A quick web search will tell you what primers are available.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: CZ527 carbine 7.62x39

Post by in2anity » 10 Aug 2017, 7:27 pm

SHV wrote:
in2anity wrote:Nice SHV - remember TB isn't renowned for it's pinpoint accuracy. It's advantage comes from its economy and less wear-and-tear on your rifle.


reasonable accuracy will be ok, it is fun to shoot


Next step is to try and send some lead through her - do you know if she'll stabilize a 180gr?
At what point does lack of maintenance become patina?
User avatar
in2anity
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3048
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 18 Aug 2017, 5:25 pm

in2anity wrote:
SHV wrote:
in2anity wrote:Nice SHV - remember TB isn't renowned for it's pinpoint accuracy. It's advantage comes from its economy and less wear-and-tear on your rifle.


reasonable accuracy will be ok, it is fun to shoot


Next step is to try and send some lead through her - do you know if she'll stabilize a 180gr?


easy to clean the barrel after shoot the lead cast bullet?

got magnum primer to try 7.7 gr trail boss next time :lol:

IMG_3559_副本.jpg
IMG_3559_副本.jpg (203.61 KiB) Viewed 5756 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 18 Aug 2017, 5:26 pm

IMG_3552_副本.jpg
IMG_3552_副本.jpg (193.21 KiB) Viewed 5756 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 18 Aug 2017, 5:27 pm

IMG_3546_副本.jpg
IMG_3546_副本.jpg (236.19 KiB) Viewed 5756 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 18 Aug 2017, 5:28 pm

IMG_3557_副本.jpg
IMG_3557_副本.jpg (241.37 KiB) Viewed 5756 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

Re: CZ527 carbine 7.62x39

Post by SHV » 18 Aug 2017, 5:31 pm

forgot to say last time tried 2x 5 shoot, 7.7 TB with normal primer, first 5 shot is normal, last one is not to bad

2204392ssf3voedserc2gp.jpg
2204392ssf3voedserc2gp.jpg (735.58 KiB) Viewed 5419 times
SHV
Sergeant Major
Sergeant Major
 
Posts: 1581
New South Wales

PreviousNext

Back to top
 
Return to Centerfire rifles