APS450 vs 650 for 9mm - big difference?

Reloading equipment, methods, load data, powder and projectile information.

APS450 vs 650 for 9mm - big difference?

Post by Yes » 20 Nov 2026, 3:31 pm

As per the title... I want to reload 12g and 9mm, and thinking about stocking up on the one powder to do it all. I would like the slower burning 450 for my 12g lighter loads (lower recoil for the missus). For 9mm, at this stage using I've been using 124 Berry's. Tigershark guy did a review on the 450 before the 650 came out and rated it higher than AP70 (which is what I used for years!). The gun is Gen 5 Glock. And will be a Gen 6 glock once they arrive in Aus in the 49A varient.

Any real world experience on the forum? Or should I just go 450 for the 12g and 650 for the 9mm?
Yes
Private
Private
 
Posts: 83
New South Wales

Re: APS450 vs 650 for 9mm - big difference?

Post by morerams » 20 Nov 2026, 8:42 pm

I wouldn't be too set on using one powder, supply is inconsistent at best.
morerams
Recruit
Recruit
 
Posts: 35
Queensland

Re: APS450 vs 650 for 9mm - big difference?

Post by deye243 » 20 Nov 2026, 9:55 pm

The 450 is faster than 650 as it's the powder that replaces ap50 and 650 replaces ap70 .
I use aps650 in 9mm and find it very clean and consistent with plated hardcast .
If you are after shot shell loads for hunting i would use 650 but if its just clays then 450 or 350 if you can find some .
User avatar
deye243
Major
Major
 
Posts: 2839
Victoria


Back to top
 
Return to Reloading ammunition