260 rem what's ur best load

[Herdsman]

Hmm, that's quite a bit of cratering at just 46gr to be going higher.

[deye243]

yep and nothing out of the ordinary for a rem 700 look at the radius on the primer

[lole]

yep and nothing out of the ordinary for a rem 700 look at the radius on the primer

Hadn't heard that before.

Size issues with the firing pin hole is it?

[deye243]

yep and nothing out of the ordinary for a rem 700 look at the radius on the primer

Hadn't heard that before.

Size issues with the firing pin hole is it?

that and a slight countersink around the hole i have had rem700 since the 80s and it started with the ones i have in the 90s

i can get 6 + loads out of all my calls and just neck and no bolt or primer pocket probs so there not hot just optimum there's

a difference

[Sender]

that and a slight countersink around the hole i have had rem700 since the 80s and it started with the ones i have in the 90s

Is that around the time they went to Marlington?

[dan76]

Tikka T3 laminate .260 Remington
Hornady 123 A-Max projectile
Norma brass
38.5 grains AR2208
.288 neck sized
Federal LR primer
Range 100 meters