Starting weight for load development please?

Reloading equipment, methods, load data, powder and projectile information.

Re: Starting weight for load development please?

Post by bladeracer » 23 Feb 2021, 8:29 pm

on_one_wheel wrote:I bought myself a Candaian made Shooting Chrony because screw you china :lol:

Unfortunately I'm lead to believe their out of business. :(


Canadian made?
What brand is it?
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 12656
Victoria

Re: Starting weight for load development please?

Post by on_one_wheel » 23 Feb 2021, 8:41 pm

Shooting Chrony INC

They even had a service where for a fee they would rebuild your chronograph if you shot it.

I got the F-1 with a remote display, I wish I'd bought the printer with it.
20210223_211430.jpg
20210223_211430.jpg (93.7 KiB) Viewed 1006 times
Gun control requires concentration and a steady hand
User avatar
on_one_wheel
Colonel
Colonel
 
Posts: 3562
South Australia

Re: Starting weight for load development please?

Post by on_one_wheel » 23 Feb 2021, 8:59 pm

S#/T !!! that just cost me 200 bucks. I Just found a printer on fleabay for it
20210223_213025.jpg
20210223_213025.jpg (61.63 KiB) Viewed 1006 times

Record your measurements with the addition of a Chrony Ballistic printer. Prints velocities as you shoot. Prints on standard roll paper, available from most stationers. Retain and store your ballistic information. 6 Volt DC adapter included. Works with all Shooting Chrony Chronographs. Prints on plain roll paper (Can be purchased at any Office Suppy Store) Uses standard IR-30 Ink (Can be purchased at any Office Suppy Store) Comes with 16 ft. interface cable and 6 volt AC adapter. Connects to the Chrony with a Cable. Prints velocities as you shoot, and/or afterwards, when retrieving from memory. When done, push button, and Printer gives statistics, such as: LO, HI and Average velocity, Extreme Spread and Standard Deviation. Also functions as a Remote Control. Works with all Shooting Chrony Models and all Master Chrony Models, please note the printer will not work with model built pre 2000.
Gun control requires concentration and a steady hand
User avatar
on_one_wheel
Colonel
Colonel
 
Posts: 3562
South Australia

Previous

Back to top
 
Return to Reloading ammunition