Taking a tumble into brass cleaners

Reloading equipment, methods, load data, powder and projectile information.

Re: Taking a tumble into brass cleaners

Post by pracshooter » 13 Feb 2015, 8:55 pm

Pins in a bag would be a complete waste of time. Cleaning takes place by a waterfall effect of brass and pins tumbling off the sides of the container and rubbing in the process. Pins are going to nothing inside a bag, except clunk a lot.
pracshooter
Recruit
Recruit
 
Posts: 14
Western Australia

Re: Taking a tumble into brass cleaners

Post by KWhorenet » 14 Feb 2015, 4:03 am

pracshooter wrote:Pins in a bag would be a complete waste of time. Cleaning takes place by a waterfall effect of brass and pins tumbling off the sides of the container and rubbing in the process. Pins are going to nothing inside a bag, except clunk a lot.


Fair points but 'clunk allot' ? I cant see that happening . The material bag I mentioned would be full of water in a washing machine, getting agitated as a top loader does.
User avatar
KWhorenet
Sergeant
Sergeant
 
Posts: 679
-

Re: Taking a tumble into brass cleaners

Post by deye243 » 14 Feb 2015, 1:09 pm

yeh but since when does a front load washer run for 3 hours or more
User avatar
deye243
Second Lieutenant
Second Lieutenant
 
Posts: 2243
Victoria

Re: Taking a tumble into brass cleaners

Post by KWhorenet » 14 Feb 2015, 1:57 pm

deye243 wrote:yeh but since when does a front load washer run for 3 hours or more


:huh: :unknown:
User avatar
KWhorenet
Sergeant
Sergeant
 
Posts: 679
-

Re: Taking a tumble into brass cleaners

Post by deye243 » 14 Feb 2015, 2:37 pm

why so defensive , grow up a bit it was not a personal attack it is what's called constructive criticism



edit did someone deleted a post

edit 2 now i will apologise as you said a top loader not front but the comment still stands :D
Last edited by deye243 on 14 Feb 2015, 2:45 pm, edited 1 time in total.
User avatar
deye243
Second Lieutenant
Second Lieutenant
 
Posts: 2243
Victoria

Re: Taking a tumble into brass cleaners

Post by KWhorenet » 14 Feb 2015, 2:44 pm

deye243 wrote:why so defensive , grow up a bit it was not a personal attack it is what's called constructive criticism



edit did someone deleted a post


I edited it before as it was as you put it.

When you start with "Since when does a.." I took that as a smart arse comment not constructive. I never mentioned using a front loader nor washing for 3 hours. My suggestion was for a simple clean not to polish brass all shiny. Some people don't want to drop hundreds on a cleaner.
User avatar
KWhorenet
Sergeant
Sergeant
 
Posts: 679
-

Re: Taking a tumble into brass cleaners

Post by lowb » 15 Feb 2015, 7:38 pm

Might clean the brass fine, do you want that fouling and other chemicals from shooting on your clothes though?

Just occurs to me might not be great for your skin?
User avatar
lowb
Recruit
Recruit
 
Posts: 34
Western Australia

Re: Taking a tumble into brass cleaners

Post by Oldbloke » 15 Feb 2015, 8:37 pm

The final rinse would remove the last of the contaminants
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11286
Victoria

Re: Taking a tumble into brass cleaners

Post by Jack V » 16 Feb 2015, 10:39 am

If you don't let your cases get real dirty then you don't need a tumbler . Washing them in CLR and warm water will get all the patina and grime off . Then rinse twice in quite hot water and dry in Sun or hair dryer or very low oven with the door left open . No heat guns either.
Jack V
Sergeant
Sergeant
 
Posts: 693
New South Wales

Re: Taking a tumble into brass cleaners

Post by lowb » 18 Feb 2015, 10:51 am

Oldbloke wrote:The final rinse would remove the last of the contaminants


Hmmm. It all washes away that easily you reckon?

Not saying you're wrong, just being cautious. You know how these kind of things in tiny doses turn out to be bad for you 20 years later...
User avatar
lowb
Recruit
Recruit
 
Posts: 34
Western Australia

PreviousNext

Back to top
 
Return to Reloading ammunition