Dillon gear

Reloading equipment, methods, load data, powder and projectile information.

Dillon gear

Post by Danny » 24 Aug 2021, 9:53 am

With the current shortages of all things dillon does anyone know somewhere with 38 super and 44 magnum dies in stock?
Danny
Recruit
Recruit
 
Posts: 19
Queensland

Re: Dillon gear

Post by Bello » 24 Aug 2021, 10:02 am

I used NVT in western Australia
They are specialist in Dillon gear.
Unit 11/25 Rawlinson St O'Connor Western Australia 6163
Telephone: (61) 089 313 7444
Orders Freecall: 1800 190 000
E-mail: support@nvt.com.au
User avatar
Bello
Corporal
Corporal
 
Posts: 313
New South Wales

Re: Dillon gear

Post by Bugman » 24 Aug 2021, 11:33 am

Try David Bailey Shooting Supplies.
User avatar
Bugman
Warrant Officer C2
Warrant Officer C2
 
Posts: 1071
New South Wales

Re: Dillon gear

Post by pomemax » 24 Aug 2021, 2:26 pm

you can use Rcbs dies just had a quick look on the net not many of anything around a lot show them out of stock
safarie has RCBS 38 SUPER 3 DIE CARBIDE TAPER CRIMP SET - SKU: R20215 $308
HPGS has RCBS 3 DIE CARBIDE SET 44 MAG $160 low stock showing
pomemax
Warrant Officer C2
Warrant Officer C2
 
Posts: 1165
New South Wales

Re: Dillon gear

Post by disco stu » 25 Aug 2021, 12:02 am

I thought I read that simplex fit them also, but could very well be wrong on that
disco stu
Sergeant
Sergeant
 
Posts: 526
New South Wales

Re: Dillon gear

Post by lcpltac » 25 Aug 2021, 11:47 am

Any 7/8 - 14 thread die will work. I use Lee factory crimp dies in Station 5 on my 650’s and an EGW undersize Sizing die in Station 1 of my 9mm tool head. You can use Lee, RCBS, Dillon, Hornady etc etc. I have noted that some Lee dies almost run out of available thread for the lock nut as they’re pretty short, but you can make them work.
lcpltac
Recruit
Recruit
 
Posts: 21
Western Australia

Re: Dillon gear

Post by pomemax » 25 Aug 2021, 1:41 pm

I have noted that some Lee dies almost run out of available thread for the lock nut as they’re pretty short, but you can make them work.
try the lock nut under the tool head
I have one tool head that I use for lee Quick trim dies with a universal deprime die just change the trim to what ever cal I'm doing and using this trimmer with a cordless screwdriver https://www.ozgunmart.com.au/lee-deluxe ... mmer-90670
then tumble them .
pomemax
Warrant Officer C2
Warrant Officer C2
 
Posts: 1165
New South Wales


Back to top
 
Return to Reloading ammunition