303-22 load data

[6878mm]

Does anyone have any load data using ADI powders for this caliber
I KNOW there are several variants of it , I KNOW
I am notsure what oneit is, I am in the process of dertimining what it is
Any data to start will be appreciated
The only inf. that Ihave been abletofind is an old Nick Harvey data,it`s 32gr of 2208 for a 55gr projectile
I willprobably go with that, butI would at least like to know what else there is

[No1Mk3]

G'day mate, until you know what version you have it is going to be impossible to suggest data, I would recommend you start with Sprinter data until you are certain you have a Falcon, and not one of the many "one off" gunsmith specials.

[6878mm]

I will, what is it??

[6878mm]

What is sprinter data??

[Pendous]

What is the case length or case capacity?

IMG_0444.jpg (691.13 KiB) Viewed 4106 times

early ADI data

[6878mm]

Thankyou very, very much
Thisis exactly what I wanted
This looks like itcame out of an ADI book,what year was it
I have the latest and an earlier version, printed in 1996 and they do not list them
Thanyou again

[Pendous]

1st Addition ADI,1996 copy is the second.
Heres a better copy/scan to print/save.

20231202.jpg (459.04 KiB) Viewed 4063 times

[6878mm]

Thankyou very, very much
It`s the 2nd edition that I have

[bladeracer]

Does anyone have any load data using ADI powders for this caliber
I KNOW there are several variants of it , I KNOW
I am not sure what one it is, I am in the process of determining what it is
Any data to start will be appreciated
The only inf. that Ihave been able to find is an old Nick Harvey data, it`s 32gr of 2208 for a 55gr projectile
I will probably go with that, but I would at least like to know what else there is

We really need to know what the cartridge is, which powders you want to use, and which bullets.
But I would use AR2206H, start around 30gn or so behind 55gn bullets and work up or down until you find what you want.

[straightshooter]

Waterworth.pdf

(540.03 KiB) Downloaded 127 times

Here is some additional info from a 70's version of Reloading Simplified by Cyril Waterworth.
You might have to do an internet search of burning rate tables to establish equivalent modern powders.
As for the various names applied to a 22/303 I believe the only real issue is whether your case is simply a full length 303 necked down to 22 or a shortened case.

[Oldbloke]

You might get lucky here.

Burn Rates_121211.pdf

(34.28 KiB) Downloaded 143 times

[Oldbloke]

We really need to know what the cartridge is, which powders you want to use, and which bullets.
But I would use AR2206H, start around 30gn or so behind 55gn bullets and work up or down until you find what you want.

Agree. AR2206H is the GOTO.

[Blr243]

Been 30 yrs since I loaded for 30322. Just looking though the data and speeds I always knew it does not match 22250 performance but it’s certainly up there. I guess in history it may have been chosen as a roo gun.

[Blr243]

Been 30 yrs since I loaded for 30322. Just looking though the data and speeds I always knew it does not match 22250 performance but it’s certainly up there. I guess in history it may have been chosen as a roo gun.

[Pendous]

Scan_20231205 (2).jpg (740.55 KiB) Viewed 3599 times

Scan_20231205.jpg (740.35 KiB) Viewed 3599 times