by cavok » 21 Dec 2014, 7:56 pm
There is no technique to removing any projectile struck in a barrel.
With pistol, revolver or semi, get yourself a 5/6mm brass or stainless rod, approximately 25cm long.
Mostly a projectile, irrespective of its weight is in the middle or either end. Get a piece of stick, cable tie, anything when inserted into the barrel will indicate the position of the stuck projectile. No need to disassemble either the revolver or semi, place end of brass or stainless rod on firm ground, barrel first if at chamber end, a few light taps it will be dislodged.
Some people use a rod with a handle and strike the projectile in the barrel several times, it is easily dislodged. Irrespective of the projectile position in the rod, place barrel over rod push down several times, again easy.
No damage.
“When all about you have lost their heads and you remain calm, perhaps you do not understand the problem”.
Per ardua ad astra.