i not long had a 260R built on a long action and over the last couple of days i figured
as i do to take it out and find how far i can push it .
The rifle
- IMG_2167 (Medium).JPG (229.72 KiB) Viewed 3775 times
now for a 260 it is treading hot on the heels of a 270W .
this was yesterdays result ---------------------------------------------------------------------------------------------------------------------
this thing is now in 270W territory albeit some what flatter shooting and harder hitting because of
the higher BC of .552 . not much pressure yet all with easy bolt lift but the last 2 did stretch the case
head a bit........ think i might have a go at 46.5g just to see what groups it will give ....
- IMG_2158 (Medium).JPG (219.49 KiB) Viewed 3775 times
now today-------------------------------------------------------------------------------------------------------------------------------------------
i went back out today to try and find a spot out of the wind and see if the 46.5g load would group
and nope the wind was switching all over the joint so i just put 3 over the mag3 and this load has
potential if it groups .
load is rem case ar2209 46.5 CCI BM@ primer BURGER 130VLDH primer pockets are still tight they will get 2 more loads tomorrow .
- IMG_2173 (Medium).JPG (140.51 KiB) Viewed 3775 times
cheers