Adler bubbafication

[Supaduke]

I would look at the rem870 forend adapter. If you are going for tactical, there are some really sweet forends available with inbuilt lights, lasers, rails and all sorts of tacticool trinkets.

[Oldbloke]

http://leeprecision.com/12g-load-all-ii.html

Both oldbloke and myself use that press,works a treat and hard to beat for the price. Also the mob that make the Russian slug molds make expanded powder bushings for it too.

Dobbed in

Yes, I must have loaded 2k rounds with mine over the years. Amazing for just plastic and aluminium.

If you want you can buy a Lee loader version. But tbh I don't see the point given you are one of these blokes who waste s**t loads of pb.

[Oldbloke]

Pb f***ing deserves to get wasted!

What about the environment?

Actually, the solution to polution is dilution.

[juststarting]

What's pb?

[juststarting]

Never mind, Mr Chemistry.

[juststarting]

OB, I do love the Lee Classic Loader concepts in a post apocalyptic kind of way... But press is the way to go for me. Just makes everything easier I think. I'll start with rebuilding target loads first. But press is certainly on the card in the near future.

[AusTac]

OB, I do love the Lee Classic Loader concepts in a post apocalyptic kind of way... But press is the way to go for me. Just makes everything easier I think. I'll start with rebuilding target loads first. But press is certainly on the card in the near future.

Don't do a classic lee loader set! I use it for .303 and it's a pain in the arse after 50 rnds! I can't see you being satisfied with it anyway haha

[Oldbloke]

OB, I do love the Lee Classic Loader concepts in a post apocalyptic kind of way... But press is the way to go for me. Just makes everything easier I think. I'll start with rebuilding target loads first. But press is certainly on the card in the near future.

I wasn't recommending classic lee loader Just saying its an option. Very slow to load with. I stared out with one that was given to me, but quickly moved to the loadall. (plastic.fantastic. )

[scaredyet]

Tactical Choke-
https://www.dropbox.com/s/ol7yas05mdlqz ... 0.jpg?dl=0

https://www.dropbox.com/s/4xho92zzeqmmx ... 1.jpg?dl=0

Magpul Forend- https://www.dropbox.com/s/al1ffplvvclax ... 6.jpg?dl=0

[juststarting]

Get a 5/8th wad punch so you can make cards to go under the slug so it doesn't eat the wad

So basically a 16mm pipe and give it an edge on the grinder... I'll have to source one Thanks.