Kase AnnealR? Thought on annealing brass

Reloading equipment, methods, load data, powder and projectile information.

Kase AnnealR? Thought on annealing brass

Post by Cooper » 06 Aug 2017, 4:34 pm

https://m.youtube.com/watch?v=IlunXQm9wzY

Posted a YouTube video of the Kase AnnealR Aussie made anneal machine. Thoughts?
I'd like a any easy way to anneal brass consistently. Definaltely think the propane cylinder would lose pressure and effect temperature of flame. Otherwise probably not too bad for the price? Around $400 plus freight.
Cooper
Sergeant
Sergeant
 
Posts: 539
Victoria

Re: Kase AnnealR? Thought on annealing brass

Post by Gwion » 06 Aug 2017, 4:54 pm

Too expensive. These machines were developed by adapting a DIY project from Yourube. On another forum there was a detailed open source thread where a whole bunch of people contributed ideas as to how to build. This is obviously a derivative if that thread. Plenty of commercial annealers available for that price and this is commercialising an open source project that was intended to help shooters save money. You can put it all together for about $80-120.
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Kase AnnealR? Thought on annealing brass

Post by Gwion » 06 Aug 2017, 5:11 pm

User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-

Re: Kase AnnealR? Thought on annealing brass

Post by Cooper » 06 Aug 2017, 6:26 pm

Thanks Gwion. Will check it out.
Cooper
Sergeant
Sergeant
 
Posts: 539
Victoria

Re: Kase AnnealR? Thought on annealing brass

Post by Gwion » 06 Aug 2017, 6:47 pm

:thumbsup:
User avatar
Gwion
Colonel
Colonel
 
Posts: 3978
-


Back to top
 
Return to Reloading ammunition