darwindingo wrote:G"Day my mate had a set do something similar... It appeared to be an electrical interference issue (in his case) are you using them near anything that may be causing some kind parasitic interference..? Try testing them away from all other electronics including things like mobile phone etc.. Would be worth a try imo..
Also try calibrating if you have not already done so.. But I suspect interference...
Edit.. I can deduce from Chronos post, I'm not the only one that suspects some kind of interference..
Good luck..
Chronos wrote:
was my first thought, could even be interference coming from a light in another room. Companies like Lyman have increased the amount of shielding in their units
Chronos
snag wrote: Bugger new technology, old way is stress free.
snag wrote:Mine has been thrown to the back of the reloading cupboard where it will stay until I do a clean out.
Went back to my Lee beam scales and now I find that they're just as quick and never lose zero. Bugger new technology, old way is stress free.
Oldbloke wrote:snag wrote:Mine has been thrown to the back of the reloading cupboard where it will stay until I do a clean out.
Went back to my Lee beam scales and now I find that they're just as quick and never lose zero. Bugger new technology, old way is stress free.
So your happy with the Lee scales? They look cheap & nasty..
snag wrote:So your happy with the Lee scales? They look cheap & nasty..
Oldbloke wrote:But occasionally you hear people grizzle about them.
Conallin24 wrote:Hi guys. About 6 months ago I bought a small set of Hornady electronic scales. I was very impressed with these scales and they have worked very well for me up until this weekend. Every 2/3 seconds the weight it shows on screen changes by around .2-.8 of a grain. This has made it hard to load anything. I have checked and it’s not breathing on the scale. The bench seems to be very sturdy and not on a angle and nothing is in inbetween the scale and bench. Should I take it back and see if they will refund it? Can I call Hornady and see what they think? A button I’m not aware of? Any help appreciated thankyou in advance. Campbell.