G'day all i'd like to thank you all for all the good advice with the primer problem awhile back I actually tinkered with
almost all of it, did cost a little bit but its piece of mind for me
I ended up going back to the cci 250 mag primer as it was the most consistent , then started playing with bullet
seating moving it closer to the lands I ended up just touching the lands and this pic shows what I ended up with
at 100yds
I also filed off the place where the stock was touching the barrel before testing but it still took awhile to end up with
what I got
The orange is the one I started with and the green is where I finished up
cheers