Accurate factory ammo for Lithgow LA101

Rimfire bolt action rifles, lever action, pump action and self loading rifles. Air rifles.

Re: Accurate factory ammo for Lithgow LA101

Post by byadbo boy » 06 Feb 2019, 8:31 am

lovely pic- I haven't tried a CZ steel mag in mine.
I am gathering by the photo they obviously work fine so that's good to know !
They sure are sexy in black cerakote with a laminate stock.
Problem for me is I just cant bring myself to bash such a work of art stock around in a farm ute !
byadbo boy
Recruit
Recruit
 
Posts: 20
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by deye243 » 06 Feb 2019, 1:26 pm

The Ute is 70% of its use and I have found the cerakote is tough enough to cope with knocks from the window sill and frame no probs and l use 6 mags , the 101 mag and the 6 and 10 shot cz both plastic and steel no problem.
It gets used out to 300y on steel plates a lot .
User avatar
deye243
Lieutenant
Lieutenant
 
Posts: 2395
Victoria

Re: Accurate factory ammo for Lithgow LA101

Post by Mattraff » 28 Feb 2019, 3:34 pm

My 101 shoots CCI subs best and so do all my other .22's. I bought a 101 purely for patriotic reasons even though Lithgow are owned by the French. Mine stays in the safe though as I prefer my CZ as it shoots anything well whereas the 101 is very fussy. Mine has feed issues and I know it's an easy fix but at $1050 for a .22 it should not happen and was/is a real disappointment in what is otherwise an extremely well engineered and finished rifle. I think they also need to look into the magazine well and make it a little more snug as the mags are fairly loose and this may be a factor in the feed issues.
Mattraff
Lance Corporal
Lance Corporal
 
Posts: 121
Victoria

Re: Accurate factory ammo for Lithgow LA101

Post by deye243 » 28 Feb 2019, 9:03 pm

Mattraff wrote:My 101 shoots CCI subs best and so do all my other .22's. I bought a 101 purely for patriotic reasons even though Lithgow are owned by the French. Mine stays in the safe though as I prefer my CZ as it shoots anything well whereas the 101 is very fussy. Mine has feed issues and I know it's an easy fix but at $1050 for a .22 it should not happen and was/is a real disappointment in what is otherwise an extremely well engineered and finished rifle. I think they also need to look into the magazine well and make it a little more snug as the mags are fairly loose and this may be a factor in the feed issues.


As much as I like mine they should have used the ruger mags
they would have been very nice to use 10 shots and no crappy
mag hanging out like a unwelcome turd ....
User avatar
deye243
Lieutenant
Lieutenant
 
Posts: 2395
Victoria

Re: Accurate factory ammo for Lithgow LA101

Post by Bucbug » 25 Jul 2024, 4:32 am

Eley Force has been great in my 101, less than 1/2 at 50yds, 1.25 at 100yds, haven't found anything better yet
Bucbug
Recruit
Recruit
 
Posts: 1
Canada

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 27 Jul 2024, 9:38 am

According to Lithgow, the LA101 chamber was designed around the Lapua Center X round.

I believe that, the Lapua give me one hole groups at 50m every time
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by allan » 27 Jul 2024, 11:35 am

Hang on to that LA101 - I've been looking for a 22LR that would give me one hole groups every time all my life and I'm 75!!!
allan
Lance Corporal
Lance Corporal
 
Posts: 208
Other

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 27 Jul 2024, 12:58 pm

allan wrote:Hang on to that LA101 - I've been looking for a 22LR that would give me one hole groups every time all my life and I'm 75!!!


My spidey sense detects disbelief Allan.

I did say the rifle will do that, I lay no personal claim to such prowess.
The fact that a shaky old fart like myself can do it at all is more testament to the rifle than the shooter
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by deye243 » 27 Jul 2024, 1:44 pm

allan wrote:Hang on to that LA101 - I've been looking for a 22LR that would give me one hole groups every time all my life and I'm 75!!!

All depends if the one hole is .22 cal or a .50 cal hole :thumbsup:
User avatar
deye243
Lieutenant
Lieutenant
 
Posts: 2395
Victoria

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 27 Jul 2024, 3:09 pm

deye243 wrote:
allan wrote:Hang on to that LA101 - I've been looking for a 22LR that would give me one hole groups every time all my life and I'm 75!!!

All depends if the one hole is .22 cal or a .50 cal hole :thumbsup:


And there it is Deye243, it was an 8mm hole.

The rifle was in a vise, fixed to a bench, with the trigger pull the only human contact.
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by allan » 28 Jul 2024, 11:45 am

Lazarus wrote:My spidey sense detects disbelief Allan.


Nah, all good Mate - I've put a lot of effort into finding the "ultimate" 22LR repeater over the years and I know better than most how unpredictable rim fires can be - The current unavailability of quality ammo in any quantity is not helping any either.

This is the best target I've shot in some time and with the wife's rifle LOL!

https://imgur.com/xAgPsUE

I bought her a Vudoo last Christmas and it's proving to be one of the better 22's we've had in the safe. Here's the rifle and a group she shot with it shortly after it arrived.

P.S. I still love my LA101's.

https://imgur.com/fqgFR84
https://imgur.com/Oc30nsm
allan
Lance Corporal
Lance Corporal
 
Posts: 208
Other

Re: Accurate factory ammo for Lithgow LA101

Post by niteowl » 28 Jul 2024, 11:50 am

Safest way is to shoot ONE shot groups, they will all be tight :clap:
niteowl
Lance Corporal
Lance Corporal
 
Posts: 153
Western Australia

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 29 Jul 2024, 6:32 am

allan wrote:
Lazarus wrote:My spidey sense detects disbelief Allan.


Nah, all good Mate - I've put a lot of effort into finding the "ultimate" 22LR repeater over the years and I know better than most how unpredictable rim fires can be - The current unavailability of quality ammo in any quantity is not helping any either.

This is the best target I've shot in some time and with the wife's rifle LOL!

https://imgur.com/xAgPsUE

I bought her a Vudoo last Christmas and it's proving to be one of the better 22's we've had in the safe. Here's the rifle and a group she shot with it shortly after it arrived.

P.S. I still love my LA101's.

https://imgur.com/fqgFR84
https://imgur.com/Oc30nsm



Wow, Allan, that's some tight shooting, better than I could do in my dreams, well done that man :clap:

I was just joshing with you about the disbelief, it is the internet, after all,.
People can make some big claims from anonymity.
"Didn't happen without a picture" is the mantra now.

What scope is your rifle wearing?
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 29 Jul 2024, 4:24 pm

allan wrote:
Lazarus wrote:My spidey sense detects disbelief Allan.


Nah, all good Mate - I've put a lot of effort into finding the "ultimate" 22LR repeater over the years and I know better than most how unpredictable rim fires can be - The current unavailability of quality ammo in any quantity is not helping any either.

This is the best target I've shot in some time and with the wife's rifle LOL!

https://imgur.com/xAgPsUE

I bought her a Vudoo last Christmas and it's proving to be one of the better 22's we've had in the safe. Here's the rifle and a group she shot with it shortly after it arrived.

P.S. I still love my LA101's.

https://imgur.com/fqgFR84
https://imgur.com/Oc30nsm



Not in your league Allan, but I did these today, "minute of rabbit" will do me.
My printer was having a bad hair day so I had to improvise the target.

20240729_161916.jpg
20240729_161916.jpg (436.74 KiB) Viewed 1909 times


PS
The random seeming holes are shrapnel, I put the target too close to the backstop
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Re: Accurate factory ammo for Lithgow LA101

Post by allan » 30 Jul 2024, 11:24 am

Nothing wrong with that - Looks like yours shoots CCI Mini Mags just fine.
allan
Lance Corporal
Lance Corporal
 
Posts: 208
Other

Re: Accurate factory ammo for Lithgow LA101

Post by Lazarus » 30 Jul 2024, 11:45 am

allan wrote:Nothing wrong with that - Looks like yours shoots CCI Mini Mags just fine.


I'm quite surprised at that.
I had convinced myself that it liked subs the best, but it seems to love the Mini Mags, as you say.

They're a fair bit cheaper than the subs, so......
Courage is knowing it might
hurt, and doing it anyway.
Stupidity is the same
.
And that's why life is hard
User avatar
Lazarus
Second Lieutenant
Second Lieutenant
 
Posts: 2190
New South Wales

Previous

Back to top
 
Return to Rimfire rifles, and air rifles