rsj223 wrote:The Geco Rifle and RWS club and rifle match were fairly good in mine Eley match a bit better still heaps of testing to do.
bladeracer wrote:I can confirm that the low comb was a dumb idea on a rifle with no iron sights on it, it's far too low for scope use, so I'll have to put a cheek riser on the OEM stock.
bladeracer wrote:rsj223 wrote:The Geco Rifle and RWS club and rifle match were fairly good in mine Eley match a bit better still heaps of testing to do.
Testing is fun too
Can you get any SK Rifle Match or High Velocity in your area?
Tiger650 wrote:bladeracer wrote:I can confirm that the low comb was a dumb idea on a rifle with no iron sights on it, it's far too low for scope use, so I'll have to put a cheek riser on the OEM stock.
I would think about a velcro attached "stock pack" rather than anything fixed by through the stock bolts, I put an adjustable riser on the young blokes Remington VSSF and it is a PITA to get the bolt out to clean the bore.
On his Omark 44 I used a stock pack and that is heaps better.
rsj223 wrote:Just a teaser pic coz more need to do this
rsj223 wrote:Cobra I got at gunco, very cheap and did not do very well so gave that one to the son to plink away, I think its made by Olin not worth it in my opinion.
rsj223 wrote:Cobra I got at gunco, very cheap and did not do very well so gave that one to the son to plink away, I think its made by Olin not worth it in my opinion.
bladeracer wrote:I did also manage a quick plink at the rams at 50m offhand - ten rounds for ten hits. Happy with that, but it's considerably more difficult at 100m
in2anity wrote:bladeracer wrote:I did also manage a quick plink at the rams at 50m offhand - ten rounds for ten hits. Happy with that, but it's considerably more difficult at 100m
Twice as difficult if my math is correct
bladeracer wrote:in2anity wrote:bladeracer wrote:I did also manage a quick plink at the rams at 50m offhand - ten rounds for ten hits. Happy with that, but it's considerably more difficult at 100m
Twice as difficult if my math is correct
If only it were that easy!
rsj223 wrote:Another one to try.
https://www.winchesteraustralia.com.au/ ... B194122400
rsj223 wrote:I did notice with the Browning ammo the "bullet" was loose it would wobble and turn the LGS said thats normal hmm
rsj223 wrote:Not wanting to hijack your thread but thought you may like the following results, I think some got worse because I removed the stock to adjust the trigger (not much better with the screw almost out)
Ruger American Target.
Highland RX= 65.70mm
Highland HV=32.93mm
CCI Std=13.52mm
CCI Subs=76.40mm
CCI Velocitor=16.68mm
CCI Mini=37.53mm
Federal Target=56.41mm
Eley HV=28.34mm
Eley Sport=42.24mm
Win 42g=32.19mm
Win Subs=17.97mm
RWS Club=15.59mm
RWS Subs=38.91mm
RWS Match=29.49mm
Gecko=84.57mm
rsj223 wrote:Hmm
https://www.facebook.com/NIOATV/photos/ ... =3&theater
bladeracer wrote:rsj223 wrote:Hmm
https://www.facebook.com/NIOATV/photos/ ... =3&theater
I saw that
They fail to tell us the range though.
Both my rifles can equal that or even better...at three meters range.
Milesy wrote:Savage Mk 11 22lr laminated Varmint
Got a barrel like a tank!
Regret not getting Ruger American as I have one in 223 and love it.