Gun safe inspections.

Questions about Queensland gun and ammunition laws. QLD Weapons Act 1990.

Gun safe inspections.

Post by Damo300 » 20 Nov 2026, 4:19 pm

Just got a phone call from weapons licencing Qld and they are coming out for an inspection next week.
My first one.

I'm not denying that I'm a little anxious, for no reason other than breaking my vaginity on inspections. Never had police check my guns before.
I know my storage is correct, and my ammunition is locked up in the same safe in its own compartment, it's just that the nerves are kicking in and my autism is going over every fine detail to make sure I am compliant in my mind.

Can't wait for this to be over..... :lol:
Damo300
Corporal
Corporal
 
Posts: 255
Queensland

Re: Gun safe inspections.

Post by Damo300 » 20 Nov 2026, 6:07 pm

Does leaving a straight pull 12g action open do damage the spring?

I don't leave my air rifles opened, that's just plain stupid, but the 12g is supposed to have the action opened.
Why?
That's just plain stupid and you're being forced to mistreat your firearm.
Damo300
Corporal
Corporal
 
Posts: 255
Queensland

Re: Gun safe inspections.

Post by Wapiti » 20 Nov 2026, 6:37 pm

It certainly will Damo.
And even the importers of the Turkmenistan jobs admit that even with normal shooting, the springs lose up to 30%of their length and power, causing malfunctions.

Ah, remember the good old days when we has US made semi-auto shotguns that never needed new springs - except in high usage tasks like years of aerial feral control.
Even those 223's were going down in testing untill the springs gave out. Terrible.

Lucky they're cheap mate.
Actually... no, these Turkish springs can't be imported now. Give Albanese a ring, he might let one through.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: Gun safe inspections.

Post by morerams » 20 Nov 2026, 8:31 pm

Put a trigger lock on the straight pull if you are concerned.
If you do a bit of research on springs you will find they fatigue from use not from storage either compressed or relaxed.
morerams
Recruit
Recruit
 
Posts: 35
Queensland

Re: Gun safe inspections.

Post by Wapiti » 20 Nov 2026, 8:54 pm

morerams wrote:Put a trigger lock on the straight pull if you are concerned.
If you do a bit of research on springs you will find they fatigue from use not from storage either compressed or relaxed.


Sorry mate, you've been given the wrong information there.
Anyone building processing machinery, or testing springs and rate in modified engines knows this too. We actually do the tests and measure the change in both rate and length.

Do it yourself. Get two any any of the same batch of any spring, compress one to the specs given for it and leave the other in it's box. You won't say that again.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: Gun safe inspections.

Post by Die Judicii » 20 Nov 2026, 9:48 pm

Whatever you do,, do NOT store bolts in with ammunition.
Because in fine print (Qld legislation) the "bolt" of any firearm is considered to be a "firearm" in it's own right.

Qld firearms branch's own printed publication says the bolt must be removed from the firearm. And can be stored with the firearm so long as it is removed.
I do not fear death itself... Only its inopportune timing!
And,,,,It's been proven,,,,, the most trustworthy females in my entire life were all canines.
User avatar
Die Judicii
Brigadier
Brigadier
 
Posts: 4476
Queensland

Re: Gun safe inspections.

Post by Damo300 » 20 Nov 2026, 10:09 pm

I figured the spring similar to an old air rifle that was stored in the cupboard cocked for 5yrs.

Trigger lock is a great idea.
Can use them on the air rifles too.
They're side levers, not break barrels.
I'll get onto that.

Albozo banning parts is a concern.
It does get tiring having politicians chip away at our freedoms year in year out.
I miss the fun country.
Can't we recind some laws.
This is getting stupid.
Damo300
Corporal
Corporal
 
Posts: 255
Queensland

Re: Gun safe inspections.

Post by Damo300 » 20 Nov 2026, 10:39 pm

Die Judicii wrote:Whatever you do,, do NOT store bolts in with ammunition.
Because in fine print (Qld legislation) the "bolt" of any firearm is considered to be a "firearm" in it's own right.

Qld firearms branch's own printed publication says the bolt must be removed from the firearm. And can be stored with the firearm so long as it is removed.



I had that drilled into me at my safety course.
He kept coming back to that point, so I guess if I remember anything from that day, it's that the Barrel, receiver, magazine, bolt, trigger are the 5 things that are considered to be a firearm, regardless if they're all seperate and cannot be stored with ammunition.

My bolts are on the ground next to the buttpad of the rifle.
That's silly as well.
Why remove bolts at all?
They don't in the gunshops.
Things that make you go hmmmm!
Damo300
Corporal
Corporal
 
Posts: 255
Queensland

Re: Gun safe inspections.

Post by Wapiti » 21 Nov 2026, 6:20 am

Damo has hit the nil on the head, these last don't make sense.
I just don't get it.
And senior police, together with government policy advisors made this junk up, so look, no wonder it reads like these laws were written by a drunk.
And the cops make up their own perversions of the written act. Twists, as if using reality to catch people out.

Example - storing firearms... the Qld act says, in the approved storage facility dependant on circumstances (whether at primary storage address, travelling or camping) that you store the firearms with EITHER the bolt removed or the action open.
The polices fact sheets have decided that with bolt actions, the bolt HAS to be removed. Even though they call the bolt an integral part of the firearm.
So many people can then be sent to court to lose $20K for the lawyer, for the judge to find the work in the act is OR. i.e EITHER.
The police love it.

Then there's magazines. An integral part of the firearm.
Nowhere in the act does it specifically say that magazines cannot be stored with ammo in them. Yet chuck in the "integral" word, and the law can charge you with a loaded firearm if you have a loaded mag locked away with your ammo, out of the gun, even though it just does not make sense.
A magazine is a firearm?

Then of course there's the pump, break, semi, straight pull fiasco where the bolt can stay in.

So a thinking, intelligent person can make these mistakes. Because the act was written by backstabbing ladder climbers who shoot themselves from their holsters, and pronoun filled blue haired parasites.

If anyone can put up a snapshot to show me the words in the act make what I've said untrue, please do because all this just makes me untrust police and government more.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3348
Queensland

Re: Gun safe inspections.

Post by Butch DDG41 » 21 Nov 2026, 7:47 am

I'm not in QLD but in NSW. I got a good tip from a mate to print out the safe storage rules direct from the police website and stick it to the inside door of you safe.
Then if there is any contention, you can point to their rulebook and nicely ask them why they are going against it. For an inspection I have the bolts locked away separate and a lock on the shotty as pulling apart the old Baikal was never meant to be easy thanks USSR..

But I have never had the police check inside the ammo compartment, only the safe is compliant, bolted down etc, and the serial numbers of the firearms.
Butch DDG41
Recruit
Recruit
 
Posts: 8
New South Wales

Re: Gun safe inspections.

Post by Fester » 21 Nov 2026, 8:35 am

I waited over 7 years and expected that I fell through the cracks, then they were told to inspect everyone around the covid years.
They rang about 3 times, but didn't ring back for the final inspection times.
I felt a little anxious, and one was a woman. It only takes an anti cop, and you can have issues.
Blokes had to bolt down their over 150KG safes as it was easier than fighting the cop, who didn't know the regulations.

The one that finally turned up as organized was the head of the local licensing branch, and he was great.
I suspect he was a shooter from his knowledge, and he knew my firearms and handling were safe.

He explained the new bits that were added in NSW, like a shed must be visable from the house, and power tools must be locked up rather than laying around the garage near the safe.
He said that after a theft, if power tools are there, they can take the guns.

He said to keep up with their fact sheets, as the thing about needing proof of an inspection before a PTA was likely to happen.

I just keep empty mags in the safe ammo compartment, and bolts in conduit pipe holders on the door in the rifle section.
They are white and labeled, so the wrong bolt can't be grabbed by mistake.

We don't need trigger locks and stuff, but I just opened the actions as a first step when removing straight-pulls from the safe.

I know have the issue of needing a PTA on hand for when the straight pulls are stolen and need replacing because PTAs only last 3 months, but now take over 100 days to obtain.
The registry don't think its a good idea, but I told them I have no other option, as they, and the govt don't know what they are doing.

As I hand nothing in until a week before I have to, it's likely they will add the inspection thing in on one of my PTA applications to further delay things.

I had a CZ bolt spring wear out somewhat over about 8-9 years of fairly heavy use; I always de-cock it.
I know which theory I will believe.
Fester
Staff Sergeant
Staff Sergeant
 
Posts: 806
New South Wales

Re: Gun safe inspections.

Post by fussy » 22 Nov 2026, 6:04 am

Took them nearly 30 years to inspect me.
Wrong address at least 6 times, despite registration and licenced. Even 1000+ Km wrong at times.
fussy
Lance Corporal
Lance Corporal
 
Posts: 167
Queensland


Back to top
 
Return to Queensland gun laws