petemacsydney wrote:i think i might try building it using some FPV/Drone equipment i have lying around. Basically i'll have a 5.8 ghz transmitter attached to a camera and powered by a 12v 3 cell lipo at the target end and then on the bench / shooter end i'll have a 5.8ghz receiver wired into an old 8 inch LCD screen with a visor on it so its easy to see in the sun. Receiver end will also be powered by a 12v 3 cell lipo. All told it will cost me 'zero' as i have all the equipment already, but if you didn't have the equipment it may be around $150 or so. Range would be about 4-6 km depending on antenna's etc, so no problems there!
Build starts this weekend!
Gwion wrote:petemacsydney wrote:i think i might try building it using some FPV/Drone equipment i have lying around. Basically i'll have a 5.8 ghz transmitter attached to a camera and powered by a 12v 3 cell lipo at the target end and then on the bench / shooter end i'll have a 5.8ghz receiver wired into an old 8 inch LCD screen with a visor on it so its easy to see in the sun. Receiver end will also be powered by a 12v 3 cell lipo. All told it will cost me 'zero' as i have all the equipment already, but if you didn't have the equipment it may be around $150 or so. Range would be about 4-6 km depending on antenna's etc, so no problems there!
Build starts this weekend!
Love to see a detailed parts list and quick rundown of build for us more technically challenged. One of these would be very handy. Where to you get these bits and pieces from?
juststarting wrote:petemacsydney, i was actually thinking drones... But since I have most parts for WiFi decided to go with that. Though, I want to store images, not just stream, so transmitter with a screen is not going to do in my case.
I restarted a DIY cam thread by the way.
Title_II wrote:Put guns on the drone and use the drone to shoot the target
petemacsydney wrote:lol, +1, guns on drones, its the answer to everything!!!Title_II wrote:Put guns on the drone and use the drone to shoot the target