Phat Girl slymm - A CVA Kentucky build

Black powder rifles and pistols, reloading black powder, and other information. The smoky stuff.

Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 02 Jun 2022, 6:57 pm

Well we all know it is damn near impossible to get Muzzleloader kits here so when I saw a 1987 50 cal percussion Kentucky Rifle Kit still in the box I bought it.
Now I know half of you are cringing and I know that the old CVA Kentucky is not exactly the pinnacle of Long Rifle builds but I thought what a great piece to practice the craft.
This is what most look like.
k7f4xbaq91671.jpg
k7f4xbaq91671.jpg (740.15 KiB) Viewed 3456 times


so here is where I am at.
P1100224tn.JPG
P1100224tn.JPG (19.23 KiB) Viewed 3456 times

20220522_085233tn.jpg
20220522_085233tn.jpg (41.26 KiB) Viewed 3456 times


Progress so far:
- Firstly I decided the brass spacer was not an option so just left it out.
- Took about an hour to get the buttplate nice and tight to the wood
- Inlet the lock in about 10 minutes
- Inlet the barrel so it sat well at the back and most of the way along (slight warpage in front end couldn't be helped).
- Had to set the barrel back to get the nipple to line up and play a little with the nipple and hammer.
- Put the corner in the tang and bent it
- Set the tang down in the wood and relieved the back of the barrel for the rear lock screw.
- The Lock screws were missing so I rethreaded a couple of others.
- Fitted the trigger. Had to bed it out and recut the threads and countersink to line up.
- Inlet the trigger guard ever deeper
- Cut the barrel off
P1100227tn.JPG
P1100227tn.JPG (22.23 KiB) Viewed 3456 times


- And the stock
- Inlet the rod thimbles
- Took to removing wood
- narrowed the grip maybe 6-8mm
- Narrowed the comb right down
- Rounded the rear forend
- Went to town on the forend such that it is about 3mm fatter than the barrel and fluted.

Before and after of forend
P1100231tn.JPG
P1100231tn.JPG (29.56 KiB) Viewed 3456 times

P1100234tn.JPG
P1100234tn.JPG (22.19 KiB) Viewed 3456 times

- Recut the muzzle and crown
- Shaped the muzzle end
- Made a forend cap (took a coupla goes). Waiting on the rivets to rivet it on.
- Shaped the lock panels
- Attempted carving
P1100229tn.JPG
P1100229tn.JPG (26.12 KiB) Viewed 3456 times


Yeah not done but coming along well I think :allegedly:
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by bladeracer » 02 Jun 2022, 8:55 pm

Beautiful!
I want to do one of these as well but I was told we can't build our own these days.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 13284
Victoria

Re: Phat Girl slymm - A CVA Kentucky build

Post by bigpete » 03 Jun 2022, 2:46 am

Very nice,I'm like bladeracer, I wanted to do a build it yourself kit but was unsure of the legalities. Plus I could only find one in 50 cal and I've already got one of them lol
bigpete
Brigadier
Brigadier
 
Posts: 4007
South Australia

Re: Phat Girl slymm - A CVA Kentucky build

Post by northdude » 04 Jun 2022, 8:14 am

Nice job
22 hornets and most things 6.5
northdude
Staff Sergeant
Staff Sergeant
 
Posts: 834
New Zealand

Re: Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 04 Jun 2022, 8:17 am

northdude wrote:Nice job

Tah
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by dnedative » 04 Jun 2022, 7:48 pm

bladeracer wrote:Beautiful!
I want to do one of these as well but I was told we can't build our own these days.


Vaguely recall the way to do it is by importing a modern lock and have that registered. Probably a Pedersoli would be the easiest.
The barrel and the rest of the bits you can figure out and get your gunsmith to formally amend the registration and there you go.
dnedative
Corporal
Corporal
 
Posts: 258
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 04 Jun 2022, 8:51 pm

Actually it is the barrel that is the problem.
But again it depends what state you are in.
In Qld you can do most of the work but an armourer must do the work that makes it fireable.
In NSW you cannot start to make anything with the intention of having a fireable result regardless of who makes it fireable.
So in NSW you need to start with a barrel registered as a firearm.
For the matchlock (built in QLD) I made everything other than the barrel and got the gunsmith to fit the breachplug and drill the touch hole.
The Flintlock I started building in QLD and finished in NSW so it was really difficult and took about 5 months to register.
This one was already registered as a firearm so no worries with it.
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by dnedative » 05 Jun 2022, 6:03 pm

LawrenceA wrote:Actually it is the barrel that is the problem.



Muzzleloaders and registered antiques probably cause the most headaches for the registry when they and the police come into contact with them I reckon.
Which bit is the actual firearm is up for debate, serial numbers all over the shop on all sorts of parts, some scratched in with a nail, some stamped and I'm sure there is more than one rifle registered with a serial number of 58BP :lol:

Thinking about it, easiest way is probably to just build it, take it into your dealer "I found this thing in the roof, can you register it for me under the anmsty, oh and its a .58 Cal CVA"
dnedative
Corporal
Corporal
 
Posts: 258
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 05 Jun 2022, 6:58 pm

dnedative wrote:
LawrenceA wrote:Actually it is the barrel that is the problem.



Muzzleloaders and registered antiques probably cause the most headaches for the registry when they and the police come into contact with them I reckon.
Which bit is the actual firearm is up for debate, serial numbers all over the shop on all sorts of parts, some scratched in with a nail, some stamped and I'm sure there is more than one rifle registered with a serial number of 58BP :lol:

Thinking about it, easiest way is probably to just build it, take it into your dealer "I found this thing in the roof, can you register it for me under the anmsty, oh and its a .58 Cal CVA"

Actually there are heaps registered as 28 which is 28bore or 58 cal as old muskets were stamped 28 for the bore size.
You are probably right abut build and register it is still not legal.
In NSW you can build a realistic Replica as long as there is no intention of making it fireable.
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 28 Aug 2022, 2:39 pm

20220828_120144l.jpg
20220828_120144l.jpg (115.83 KiB) Viewed 3037 times

Its done
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by dnedative » 28 Aug 2022, 4:30 pm

That's come up nicely, good job.
dnedative
Corporal
Corporal
 
Posts: 258
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by bladeracer » 28 Aug 2022, 5:58 pm

LawrenceA wrote:
20220828_120144l.jpg

Its done


That must be immensely satisfying!
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 13284
Victoria

Re: Phat Girl slymm - A CVA Kentucky build

Post by on_one_wheel » 28 Aug 2022, 6:16 pm

Well done LawrenceA, it looks awsome.

Have you let it rip yet?
Gun control requires concentration and a steady hand
User avatar
on_one_wheel
Colonel
Colonel
 
Posts: 3761
South Australia

Re: Phat Girl slymm - A CVA Kentucky build

Post by LawrenceA » 28 Aug 2022, 8:49 pm

on_one_wheel wrote:Well done LawrenceA, it looks awsome.

Have you let it rip yet?

Thanks mate
Not yet
One well placed shot is all it takes.
LawrenceA
Corporal
Corporal
 
Posts: 455
New South Wales

Re: Phat Girl slymm - A CVA Kentucky build

Post by Oldbloke » 24 Dec 2022, 6:43 pm

Just found this thread.
Looks great Lawrence.
Fired it yet?
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
SSAA, the powerful gun lobby. :lol: :lol: :lol: Now I'm a member. :unknown:
Hunt safe. A bit more bang is better.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 12517
Victoria


Back to top
 
Return to Black powder shooting