Not a very fancy solution but I have just used Excel for mine.
Run JBM on the net and past the results into excel.
Insert 'Line Chart' using the data you pasted and there you go. Graphical view of your trajectory
sungazer wrote:A good estimate of MV given the load and the projectile and barrel would be nice. I have think the ADI data can be a bit out from my results.
samoohrye wrote:Not a very fancy solution but I have just used Excel for mine.
Run JBM on the net and past the results into excel.
Insert 'Line Chart' using the data you pasted and there you go. Graphical view of your trajectory
Gwion wrote:Here's a link to the chart and graph i've just printed out for my rifle at the local range, using annual average climate data as a base line and high pressure/low pressure + 10C temp increments as variables:
http://www.shooterscalculator.com/balli ... t=3cdfabff
Putting the base line chart against my recorded data at 500 & 600yds, it is quite accurate. I'll use this to do my initial scope set up before i put my sighters down range in F-class.