NukeBOMB88 wrote:Gday I'm looking for some info on loads for the 204 ruger using 45grn soft point projectiles and Ar2208 Powder.
Been using 32grn Vmax/Zmax bullets with good results of about .4 moa groups using 27grns of the Ar2208 but want to try something different.
Thanks
NukeBOMB88 wrote:Yeah mines a Ruger M77 Mkii VT with a 1-12 twist barrel
bladeracer wrote:NukeBOMB88 wrote:Yeah mines a Ruger M77 Mkii VT with a 1-12 twist barrel
My American Predator is 12" as well.
I don't use AR2208 in the .204 though, I use AR2206H and BM8208, and Trailboss of course.
bladeracer wrote: , and Trailboss of course.
Ben78 wrote:bladeracer wrote: , and Trailboss of course.
What can you tell me about the trailboss loads?
NukeBOMB88 wrote:Sounds mint blade racer !
I managed to fin data for Varget powder, which is extremely similar to AR2208 and have made a load with 24.5 grains of powder. It's shooting decently with no key holing and averaging about 1 Moa
Ben78 wrote:What can you tell me about the trailboss loads?
browndog wrote:quickload suggests a maximum of 26.5 grains of ar2208 for 3480 fps. This load is compressed 104.2 percent full. Be careful.
Browndog
southwest shooter wrote:browndog wrote:quickload suggests a maximum of 26.5 grains of ar2208 for 3480 fps. This load is compressed 104.2 percent full. Be careful.
Browndog
What grain projectile ?