by Oldbloke » 24 Jan 2018, 2:22 pm
You don’t need heaps of stuff to start reloading. Some can be made or purchased second hand
YOU MUST HAVE *
* O or C Frame press-Any 7/8” press, some come with the priming tool - I have a simplex. The "O" is stronger.
* Priming tool
* Shell holder
* Dies- MUST have for each calibre. Lee RGB are the cheapest to get you started. ~$45
* Loading block(s) Easy to make
* Sizing lube- Any heavy oil will do or Lanox
* Powder funnel-Must have one of these.
* Scales. A MUST. Beam or electronic. I have beam. And everyone winges about the lee scales??
* Components, Powder, Primers Projectiles, Cases
* Access to ADI Powder manual-for loading data.
* Manual on how to do it or someone to show you.
OPTIONAL or Can wait a while
Trimmer- I think you need to buy one of these with each cartridge in the lee kit. But a generic one is best. It will do almost any cartridge, most companies sell them. I have a simplex.
Powder scoops-Easy to make
Powder measure. (If you load lots)
Primer pocket cleaner, Easy to make
De burrer, A sharp pocket knife and fine file will do this if you have nothing else
Trickler or very tiny scoop. Easy to make too
Vernier caliper to check case length & OAL. I got away with a dial plastic one for years.
Tumbler, But I use the salt/vinegar solution. Fine for most.
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby.
Hunt safe.