Resurrecting an Oldie

Improving and repairing firearms. Rifle bedding, barrel work, stock replacement and other ways to improve your firearms.

Re: Resurrecting an Oldie

Post by marksman » 06 Nov 2018, 8:53 pm

looks a treat :thumbsup:
“If you do not read the newspapers you are uninformed. If you do read the newspapers you are misinformed”. Mark Twain
User avatar
marksman
Colonel
Colonel
 
Posts: 3660
Victoria

Re: Resurrecting an Oldie

Post by Stix » 07 Nov 2018, 7:59 am

I like the timber without the checkering...

Looks nice...!
The man who knows everything, doesnt really know everything...he's just stopped learning...
Stix
Colonel
Colonel
 
Posts: 3675
South Australia

Re: Resurrecting an Oldie

Post by Sergeant Hartman » 08 Nov 2018, 7:48 am

Wow absolutely beautiful marksmanship and ingenuity at work on this project mate. Well done
Sergeant Hartman
Sergeant Major
Sergeant Major
 
Posts: 1722
Victoria

Re: Resurrecting an Oldie

Post by Homer » 12 Nov 2018, 12:06 pm

Thanks for your kind comments Fella's.

Regards
Homer
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Re: Resurrecting an Oldie

Post by Homer » 19 Nov 2018, 12:48 pm

G'Day Fella's,

While I'm in between doing other things, I've been running in the new barrel, on the BSA.
I initially cleaned the barrel and the prepped it with a Moly barrel treatment product, from Brownell's (as per their instructions).
I then fired the first shot of a ladder test, into my bullet trap and then cleaned the barrel........
Here's some images.
The loading block, with the 1/2 grain increasing powder charges (x2 each), and the first shot now fired.
DSCN3152.JPG
DSCN3152.JPG (551.04 KiB) Viewed 4604 times


Here is the bullet trap, next to my loading bench.
DSCN3145.JPG
DSCN3145.JPG (1.06 MiB) Viewed 4604 times


Here is a better view of the bullet trap (250mm Dia, 9.5mm thick steel wall x 1.500mm long steel pipe, filled with "Stuff"......... to stop bullets.
Please note the flexible exhaust hose, connected up to the B/Trap.
DSCN3150.JPG
DSCN3150.JPG (1.22 MiB) Viewed 4604 times


And the rifle in it's MTM cleaning cradle, with some Patch Out, bore solvent up the barrel.
DSCN3151.JPG
DSCN3151.JPG (713.65 KiB) Viewed 4604 times


I do a Ladder Test, and run in the barrel at the same time.
Once I'm aware of what appears to be the Maximum Safe Working Load (MSWL), I then head for the range with some additional loads, around this same powder charge.
If ithe rifle shoots OK and velocities are where they should , I will settle on a powder charge, and then work on bullet seating depth, to get it shooting to it's best.

Hope that helps

D'oh!
Homer
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Re: Resurrecting an Oldie

Post by Homer » 29 Nov 2018, 7:40 am

G'Day Fella's,

I'm still walking around the checkering job on this rifle............ I'll get there eventually.

In the mean time, I took the rifle out bush on the weekend, bore sighted it and fired some additional single shots (for the barrel run-in).
DSCN3166 (2).JPG
DSCN3166 (2).JPG (574.66 KiB) Viewed 4562 times


D'oh!
Homer
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Re: Resurrecting an Oldie

Post by marksman » 29 Nov 2018, 10:27 am

I have promised myself "I will not build" any more rifle's
only broke the promise since I made it 3 time's
and I'm getting the itch again Homer ;)

she looks really good Homer :thumbsup: :drinks:
“If you do not read the newspapers you are uninformed. If you do read the newspapers you are misinformed”. Mark Twain
User avatar
marksman
Colonel
Colonel
 
Posts: 3660
Victoria

Re: Resurrecting an Oldie

Post by Homer » 30 Nov 2018, 8:28 am

G'Day Fella's,

Thanks for your kind comments Marksman.

Mate, if all the bills are paid, there's food in the pantry and cloths and shoes on everbody's back and feet in the family, the worse thing you can say in life is, "Gee I Wish ..............."!

Avagreatweekendeh!
Homer
Last edited by Homer on 01 Dec 2018, 5:37 pm, edited 1 time in total.
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Re: Resurrecting an Oldie

Post by Member-Deleted » 30 Nov 2018, 9:07 am

Yes Homer and the next worst is oh no that was my last bullet
Member-Deleted
 

Re: Resurrecting an Oldie

Post by Homer » 10 Dec 2018, 5:13 am

G'Day Fella's,

With the barrel run in almost complete, I took the rifle to the range for the next stage of this process.
I then shot 5 shots and cleaned the barrel but at the same time chrono'ed the loads and adjusted the scope to get it on target.
Here a few images of this process
DSCN3174.JPG
DSCN3174.JPG (1.26 MiB) Viewed 4309 times

DSCN3175.JPG
DSCN3175.JPG (1.01 MiB) Viewed 4309 times


And the target from 50 and 100 meters
DSCN3178.JPG
DSCN3178.JPG (515.6 KiB) Viewed 4309 times


Please remember, I still need to re-bed the action into the stock, so given this, I'm happy with these results.

D'oh!
Homer
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Re: Resurrecting an Oldie

Post by Wm.Traynor » 10 Dec 2018, 10:03 am

That lower group looks pretty darn good :thumbsup:
Wm.Traynor
Sergeant Major
Sergeant Major
 
Posts: 1644
Queensland

Re: Resurrecting an Oldie

Post by Homer » 10 Dec 2018, 11:56 am

Thanks for that Wm.Traynor.
That was the first group, @ 50 meters and not to bad for a bore sighted (by eye) scope.

Also, the average velocity for this same load, was 3329 fps, which I'm happy with.

D'oh!
Homer
Homer
Corporal
Corporal
 
Posts: 340
Australian Capital Territory

Previous

Back to top
 
Return to Gunsmithing