Howto Zero turrets on Bushnell Engage

Rifle scopes, iron sights and optics. Spotting scopes and target acquisition devices.

Howto Zero turrets on Bushnell Engage

Post by Zappa » 08 Feb 2019, 1:25 pm

How do I zero the turrets on a Bushnell Engage ?

Both windage and elevation turrets have caps only to reveal a wedge with two small phillip screws which appears to be holding down the turret .
Do I need to unscrew the wedge ?
Seems a bit odd cause those screws would be far too easy to strip. I've tried pulling up on the turret thinking it may be a click type but it ain't.
Anyone ?

Its similar to this . Capped turrets.

https://www.horsleyparkgunshop.com.au/p ... deploy-moa
Zappa
Lance Corporal
Lance Corporal
 
Posts: 180
Victoria

Re: Howto Zero turrets on Bushnell Engage

Post by bigfellascott » 08 Feb 2019, 2:08 pm

Try their website and see if there's any advice there (I assume you haven't looked there)
User avatar
bigfellascott
Lieutenant General
Lieutenant General
 
Posts: 5289
-

Re: Howto Zero turrets on Bushnell Engage

Post by bladeracer » 08 Feb 2019, 2:54 pm

Looks like you're on the right track.
Attachments
Bushnell Engage.JPG
Bushnell Engage.JPG (71.07 KiB) Viewed 1445 times
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 12655
Victoria

Re: Howto Zero turrets on Bushnell Engage

Post by Zappa » 08 Feb 2019, 2:57 pm

Bugger. PIA.

I wonder if I can convert them to their one-click zero set .
Zappa
Lance Corporal
Lance Corporal
 
Posts: 180
Victoria


Back to top
 
Return to Scopes, sights and optics