For those that have seen my electrically driven rotating shooting platform,,
No matter what you build, there is always room for addition/s and or improvement.
I am at present midway through the process's of changing the height adjustment of the table itself to be electrically driven.
Once finished, it too will be raised or lowered at the mere flick of a switch.
This in turn will allow me to have the entire table top covered with a single one piece padded top for the entire width,,,,
rather than two separate ones that have to be moved apart every time I make a height adjustment.
The other glitch that I've encountered several times is that when moving the padded tops around in the dark,, sometimes
the one that your not actually resting on can be tipped down over the edge and down to the ground.
Hopefully everything will work as planned and life will be that much easier again. (pics when finished)