My experience with bore cleaning

Improving and repairing firearms. Rifle bedding, barrel work, stock replacement and other ways to improve your firearms.

Re: My experience with bore cleaning

Post by sungazer » 14 Mar 2020, 5:04 pm

I think he means that when he competes they place a sticker on his gun to show that it has been inspected, weighed ect and passes. Isopropyl is ok on some adhesives but if you really want a top shelf remover try Xylene
sungazer
Sergeant Major
Sergeant Major
 
Posts: 1525
Other

Re: My experience with bore cleaning

Post by Bill » 14 Mar 2020, 5:45 pm

TassieTiger Ive been racing Honda civics for the last 8 years, window banners, numbers on doors, event sponsor sticker all leave some sort of gum and Isopropyl is great for cleaning things.

I also mix it with dry ice to create a liquid slurry that freezes and allows soundening to be removed from under the carpet in a car and the boot area, I removed close to 15kg of weight out of a civic :drinks:
When a guy is digging his own grave, you don’t fight him for the shovel.

Success leaves clues, Fools follow failure !

20 Hornet, 218 Bee, 222 Rem, 256 WM, 6mm ARC, 6.5 Grendel, 6.5x55 Scan, 270 Win, 357 Mag, 358 Win, 9.3x62, 500 A Square
User avatar
Bill
Warrant Officer C1
Warrant Officer C1
 
Posts: 1253
New South Wales

Re: My experience with bore cleaning

Post by Bill » 14 Mar 2020, 5:45 pm

its a fantastic cleaning product, just expensive when you buy from a pharmacy
When a guy is digging his own grave, you don’t fight him for the shovel.

Success leaves clues, Fools follow failure !

20 Hornet, 218 Bee, 222 Rem, 256 WM, 6mm ARC, 6.5 Grendel, 6.5x55 Scan, 270 Win, 357 Mag, 358 Win, 9.3x62, 500 A Square
User avatar
Bill
Warrant Officer C1
Warrant Officer C1
 
Posts: 1253
New South Wales

Re: My experience with bore cleaning

Post by TassieTiger » 14 Mar 2020, 6:35 pm

Bill wrote:TassieTiger Ive been racing Honda civics for the last 8 years, window banners, numbers on doors, event sponsor sticker all leave some sort of gum and Isopropyl is great for cleaning things.

I also mix it with dry ice to create a liquid slurry that freezes and allows soundening to be removed from under the carpet in a car and the boot area, I removed close to 15kg of weight out of a civic :drinks:


It was jest...mere jest. I’ve got the same decals placed on my race bikes at circuits and strip.

On another note - watched a civic and late model fort gt mustang at Baskerville last year...was the most entertaining thing I’ve watched for a while. Civic got him but then got a penalty - it didn’t lose a metre on back straight to the v8...penalty was for going round outside of Stang onto grass in last lap. Great stuff.
Tikka .260 (Z5 5x25/52)
Steyr Pro Varmint .223 - VX 3
CZ455 .22 & Norinco .22 (vtex 4-12, bush 3-9)
ATA 686 U/O 12g & Baikal S/S 12g.
Adler a110 reddot
Sauer 30-06 - VX 3
Howa 300 win mag. SHV 5-20/56
Marlin SBL 45/70
TassieTiger
Colonel
Colonel
 
Posts: 3704
Tasmania

Re: My experience with bore cleaning

Post by pomemax » 14 Mar 2020, 7:00 pm

DD Eucalyptus works just as good on sticker adheasive the base of the adhesive is Krayton rubber mixed with some small amount of natural rubber and Toluene few different chemical added for shef life and stuff like that .
When i was working at the factory that makes the adhesive they had a BULK DD to remove it from people if they got covered in adheasive and it works on steel too.
pomemax
Warrant Officer C2
Warrant Officer C2
 
Posts: 1165
New South Wales

Re: My experience with bore cleaning

Post by flutch » 15 Mar 2020, 12:00 am

@bill

Civics aye? What's the view like from the back of the grid?
Guns:
Rossi S/S 410
Lanber U/O 12 gauge
Adler B220PG 12 gauge
Ruger 22lr
Remington 270 win
Howa 223
Weatherby 300 Winmag

Bows:
G5 Quest Drive
G5 Prime Defy
flutch
Corporal
Corporal
 
Posts: 447
Western Australia

Previous

Back to top
 
Return to Gunsmithing