removable cheek risers

Rimfire bolt action rifles, lever action, pump action and self loading rifles. Air rifles.

removable cheek risers

Post by greybro » 20 Feb 2021, 6:26 pm

Evening all

So, playing around with the new rifle, working out my position for a good cheek weld, and I think I need a cheek riser of sorts for my Lithgow LA101. I have fairly low rings on my optics, but when using it in prone, and a little when standing, I feel I'm holding the head up a bit to get a good sight pictures. I think I might need to move it a fraction forward too... But one thing at a time.

Does anyone here use a removable cheek riser and could recommend one? I don't think I need to come up much.

I know being a lefty makes a small difference, but everything I've seen online is for a 'standard' butt, and I noticed the Lithgow has a squarer profile on the butt.

Would appreciate advice and thoughts.
greybro
Recruit
Recruit
 
Posts: 17
Victoria

Re: removable cheek risers

Post by Tiger650 » 20 Feb 2021, 7:01 pm

A "stock pack" would be a good place to start, not expensive but recommend one with little padding, you can then adjust up with material cut from a stubbie cooler.
Tiger650
Corporal
Corporal
 
Posts: 451
Victoria

Re: removable cheek risers

Post by Tiger650 » 20 Feb 2021, 8:04 pm

Tiger650
Corporal
Corporal
 
Posts: 451
Victoria

Re: removable cheek risers

Post by greybro » 21 Feb 2021, 12:41 pm

Cheers both. Appreciate the advice. Ended up ordering this:

https://bushbuckoutdoors.com/products/r ... mmo-holder
greybro
Recruit
Recruit
 
Posts: 17
Victoria

Re: removable cheek risers

Post by Tiger650 » 22 Feb 2021, 7:48 am

Well done mate, I ordered one for my Omark.
Tiger650
Corporal
Corporal
 
Posts: 451
Victoria


Back to top
 
Return to Rimfire rifles, and air rifles