Howa 1500 misfire

Improving and repairing firearms. Rifle bedding, barrel work, stock replacement and other ways to improve your firearms.

Howa 1500 misfire

Post by Rathie » 19 May 2023, 9:03 am

Before I race off to a gunsmith I’ll ask the brains trust.

Just picked up a used Howa mini in 6.5 Grendel.

Put about 20 shots through it last weekend to site her in using factory ammo (that came with the rifle)

Had three miss fires and on safely waiting to extract the round after each Miss fire noticed that the firing pin indentation on the primer was very shallow.

The rounds that fired successfully had good primer indentation from the pin.

Any thoughts?

Cheers,
Brno Model 2 22lr
Howa mini 6.5 Grendel
Tikka M55 222 Rem
Tikka M55 6mm TCU
20 gauge single shot
Rathie
Private
Private
 
Posts: 51
Queensland

Re: Howa 1500 misfire

Post by wrenchman » 19 May 2023, 9:15 am

pull the bolt apart and clean it and check the pin i have seen a ruger that was packed with grease cousing light strikes
wrenchman
Warrant Officer C1
Warrant Officer C1
 
Posts: 1345
United States of America

Re: Howa 1500 misfire

Post by animalpest » 19 May 2023, 11:19 am

Yep, dismantle and clean the firing pin and spring. Old grease can cause issues. If it continues after cleaning, it's time for a new spring
Professional shooter and trapper
Trainer and consultant
animalpest
Warrant Officer C2
Warrant Officer C2
 
Posts: 1025
Western Australia

Re: Howa 1500 misfire

Post by deye243 » 19 May 2023, 1:16 pm

And there is not an easier rifle than a howa to remove the firing pin one twist and your all done
User avatar
deye243
Second Lieutenant
Second Lieutenant
 
Posts: 2208
Victoria

Re: Howa 1500 misfire

Post by bladeracer » 19 May 2023, 2:18 pm

Rathie wrote:Before I race off to a gunsmith I’ll ask the brains trust.

Just picked up a used Howa mini in 6.5 Grendel.

Put about 20 shots through it last weekend to site her in using factory ammo (that came with the rifle)

Had three miss fires and on safely waiting to extract the round after each Miss fire noticed that the firing pin indentation on the primer was very shallow.

The rounds that fired successfully had good primer indentation from the pin.

Any thoughts?

Cheers,


First thing to do is strip the striker out of the bolt and make sure it and the spring are clean and can freely move. Also check there are no dags in the hole in the bolt face that might cause it to bind.
Practice Strict Gun Control - Precision Counts!
User avatar
bladeracer
Field Marshal
Field Marshal
 
Posts: 12655
Victoria

Re: Howa 1500 misfire

Post by madang55 » 21 May 2023, 10:30 am

And...when you get it back in action. Mine loves the 90g and 95g proj. 123 are good. Fallow don't like the 123gr, but the 90/95s hit harder. Anything heavier starts becoming a non ballistic house brick.
My wife knows me well.
The dog often reminds me of that
User avatar
madang55
Corporal
Corporal
 
Posts: 368
Victoria

Re: Howa 1500 misfire

Post by in2anity » 31 May 2023, 1:19 pm

Common problem. Seen many a 1500 light strike particularly on ammo with hard primers, like milsurp. Try different ammo, or handload
At what point does lack of maintenance become patina?
User avatar
in2anity
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3048
New South Wales

Re: Howa 1500 misfire

Post by No1_49er » 31 May 2023, 1:46 pm

Make sure that the rear action retainer screw/bolt is not protruding into the race-way and fouling the striker in its forward travel.
I've had that happen to me with an over-torqued screw. Backed it out maybe a quarter turn - problem solved.
Proud member of "the powerful gun lobby" of Australia :)
No1_49er
Staff Sergeant
Staff Sergeant
 
Posts: 823
Queensland

Re: Howa 1500 misfire

Post by TuskerOrd » 01 Nov 2023, 3:34 pm

Hey Rathie.

Free advice from a gunsmith. Can you by any chance measure how much the cases that fires have expanded compared to some of the one's that misfired? I basically want you to measure the distance from the bottom to the datum line? If it is more than 0.1mm the new cases are most probably under size causing the misfires.
TuskerOrd
Recruit
Recruit
 
Posts: 13
New Zealand

Re: Howa 1500 misfire

Post by Oldbloke » 01 Nov 2023, 5:04 pm

TuskerOrd wrote:Hey Rathie.

Free advice from a gunsmith. Can you by any chance measure how much the cases that fires have expanded compared to some of the one's that misfired? I basically want you to measure the distance from the bottom to the datum line? If it is more than 0.1mm the new cases are most probably under size causing the misfires.
Attachments
Thumbs-up .jpg
Thumbs-up .jpg (13.64 KiB) Viewed 814 times
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
Member. SFFP, Shooters Union.
SSAA, the powerful gun lobby. :lol: :lol: :lol: :lol:
Hunt safe.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 11192
Victoria


Back to top
 
Return to Gunsmithing