Lithgow Model 12 Iron Sight Question

Rimfire bolt action rifles, lever action, pump action and self loading rifles. Air rifles.

Lithgow Model 12 Iron Sight Question

Post by Hawkalloy » 25 Oct 2024, 5:58 am

Hi

I am bringing my grandfather's Model 12 back to life; I don't believe it had been shot in over 50 years.

I've now fixed the firing pin issue and was able to successfully fire it last night for the first time.

Unfortunately, at 10m it is shooting around 150mm too high with the rear sight at the lowest setting. At 25m it wasn't even hitting the target.

Where do I start? Can the front sight be replaced with a taller one (and where would I find such a thing)? Or should I be looking at something else more obvious?

Thanks
Scott
Hawkalloy
Recruit
Recruit
 
Posts: 3
New South Wales

Re: Lithgow Model 12 Iron Sight Question

Post by Tinker » 26 Oct 2024, 7:26 pm

Are you using the factory rear sight mounted on the barrel, or is there a peep sight fitted?
These rifles are much easier to shoot with a peep sight (for my aging eyes anyway). The peep sight mounts onto the 2 small screw holes on the left rear of the receiver. They appear on eBay for sale every so often.
Attachments
Lithgow Mod 12 Sportco sml.jpg
Lithgow Mod 12 Sportco sml.jpg (270.82 KiB) Viewed 747 times
Tinker
Recruit
Recruit
 
Posts: 11
New South Wales

Re: Lithgow Model 12 Iron Sight Question

Post by bigpete » 27 Oct 2024, 4:11 am

You can most likely find a taller front sight easily enough,you just need to work out the size of the dovetail. I'd be inclined to order a blade style one that's a bit longer than you think you need,you can always file it down if need be
bigpete
Brigadier
Brigadier
 
Posts: 4005
South Australia

Re: Lithgow Model 12 Iron Sight Question

Post by Hawkalloy » 29 Oct 2024, 8:30 pm

bigpete wrote:You can most likely find a taller front sight easily enough,you just need to work out the size of the dovetail. I'd be inclined to order a blade style one that's a bit longer than you think you need,you can always file it down if need be


Thanks BigPete, I've just used an online calculator and the theoretical height on the front sight would be near 20mm, which is way too high (and not obviously readily available). I think I'll need to get a gunsmith to suss out the issue. Appreciate your feedback.
Hawkalloy
Recruit
Recruit
 
Posts: 3
New South Wales

Re: Lithgow Model 12 Iron Sight Question

Post by Hawkalloy » 29 Oct 2024, 8:32 pm

Tinker wrote:Are you using the factory rear sight mounted on the barrel, or is there a peep sight fitted?
These rifles are much easier to shoot with a peep sight (for my aging eyes anyway). The peep sight mounts onto the 2 small screw holes on the left rear of the receiver. They appear on eBay for sale every so often.


Thanks Tinker. I am currently trying to use the standard sights. Agreed my 57 yo old eyes are not coping at all. I have to get the rifle somewhere near zero, but shortly thereafter a peep sight will be on the list to keep the rifle period correct, and usable for me. Thanks for the advice.
Hawkalloy
Recruit
Recruit
 
Posts: 3
New South Wales

Re: Lithgow Model 12 Iron Sight Question

Post by Oldbloke » 29 Oct 2024, 9:38 pm

"20mm"

Strange, are you able to upload pics of current sights?
Someone may spot the issue.
The greatest invention in the history of man is beer.
https://youtu.be/2v3QrUvYj-Y
SSAA, the powerful gun lobby. :lol: :lol: :lol: Now I'm a member. :unknown:
Hunt safe. A bit more bang is better.
User avatar
Oldbloke
Field Marshal
Field Marshal
 
Posts: 12513
Victoria


Back to top
 
Return to Rimfire rifles, and air rifles
cron