Fry wrote:cavok wrote:Reloading, there is here a whole section devoted to the topic, but little actual information, if I am allowed to say this.
That's a bit harsh to everyone who's contributed info there
I was not and am not being negative, but in many of the posts there is information, on brands to purchase, and all manner of facts but no real
information on why, how and what can be reloaded, either in pistol or more importantly rifle as many shooters here are more interested in the latter, both for hunting or competition.
Dillon my preferred manual loading very inexpensive press, and I know there are many more manufactured, that allow a novice, to begin loading, with the hopeful advice they get from forum members and reloading publication. All they need to start is a modest budget, (less than $1000) one calibre to start with, empty cases, buy powder, calliper, buy some small rifle primers or other, projectiles suitable to their needs and follow instructions on amount of powder required. MOST good shops that sell a press will spend time with the customer (hopefully) explaining basics and safety. If the shop does not, find a shop that will. Also forum members here from my reading of their posts are extremely familiar with the process, and highly experienced. We all need to learn, and where to begin, the why is also critical, why bother if its less expensive to buy rounds than to load your own, the cost savings if a person shoot more than average is significant. This link is a start. Be safe, load and then check powder to ensure you do not overload or use the wrong powder. If unsure ask, get advice from people who know and are willing to help. Remember, use the right powder as recommended by powder manufacturer for your round, the correct projectile weight for your intended use, (game). Check case length and ensure correct before reloading, trim to correct length, seat projectile to correct depth and ensure overall dimensions OAL (over all length) are correct. Proceed with caution til you know you have got it right, the benefits are worth the effort.
In Australia we have a great powder manufacturer, whom I would support, ADI, sold many shops, then my secondary powder comes from Winchester, their range of primers and projectiles suitable for your needs are also sold here. Finally, if in doubt ask, or ask anyway, double check till you feel comfortable and realise you are doing it correctly, then share the knowledge with others who ask.
Web site quote"The interchangeable toolhead makes it quick, easy and inexpensive to change calibers. For example, if you load 30-06 for elk, .243 for deer and .22-250 for coyote, you don't even have to change the shellplate. You simply pull two pins and swap the toolhead with your 30-06 dies to another toolhead with your .22-250 or .243 dies in less than 30 seconds! The additional toolheads are $20.95 each, or $18.95 each if you buy three or more- if you load for several rifles it's a no-brainer! Once you get your dies set you'll never have to re-set them."
A powder measure adapter is available if you want to use a manual measure that you already own. Or, if you want to weigh every powder charge you load, it's easy- you can use a powder trickler with the powder die/ funnel assembly that comes with the BL550.
Caliber conversions and dies sold separately.
http://www.dillonprecision.com.au/image ... onstrain=1
“When all about you have lost their heads and you remain calm, perhaps you do not understand the problem”.
Per ardua ad astra.