stefo wrote:Hi guys, can anyone tell me what size rings to buy ??
just got my crossover !!
What scope you putting on it? I found leupold mediums worked well for mine with a 4.5-14x40 vx-3
stefo wrote:Hi guys, can anyone tell me what size rings to buy ??
just got my crossover !!
CustomPC wrote:The picture below shows my results on a good day when i'm shooting well. The ammo is Norma 2, Eley Match and Federal 922A
stefo wrote:What i need to know is what size rings to get that will fit on my crossover ??
CustomPC wrote:I have a CrossOver and I have had your exact scope mounted on it so i can be very specific.
CustomPC wrote:stefo wrote:What i need to know is what size rings to get that will fit on my crossover ??
You need rings which are the right height to mount your scope as low as possible but still have some clearance between the Ocular (front) lense and the barrel.
It can get very confusing as one manufacture's Low, Medium & High Rings will be different to another manufacture's low,medium and high. Most manufactures list the height from the base of the mount to bottom of the scope tube for comparison.
The Crossover has Weaver style bases so you need weaver style rings. The CrossOver's bases are quite high so you can usually use low rings for most scopes up to a 44mm Objective. Your AR Optic 2-7 is a 32mm objective so you'll have no problems with low rings.
I have a CrossOver and I have had your exact scope mounted on it so i can be very specific.
These will all fit your rifle and scope. They are ordered from lowest to highest.
Weaver Grand Slam Medium Matte Part 49303
Burris Zee 1" Low Matte Part 420083
Warne Optima Low Matte Part 200M for fixed or 201M for quick release.
Leupold PRW or QRW Low Matte.
stefo wrote:
may I ask why you got rid of the bushnell ar scope ?
Redwood wrote:Is the stock there standard synthetic?
Looks a little different or something like it's soft touch.
CustomPC wrote:I installed the scope Yesterday and bore-sighted it at 15m by placing the target outside and aiming down the hallway and into the yard from my lounge room.
BBJ wrote:I'm not up on the Lithgows, what are these "modifications" they're calling out exactly?
Wylie27 wrote:Just put a deposit down for a left handed version.
Can't wait to get my hands on it and sight it in.
Wylie27 wrote:I think I have convinced the wife not to go pink.. I used the argument a firearm should look like a firearm and not a nerfgun.