deye243 wrote:Yep at 3000 yards
EDIT looks like 2100 will pull it up
brett1868 wrote:deye243 wrote:Yep at 3000 yards
EDIT looks like 2100 will pull it up
Yep, drops subsonic about 2100 yards but should make a nice ringing sound on impact
Nice target, I'd like a few like that myself once I get some lockup storage organised on my block. Was it plasma cut? How heavy is it?
nope i did it withe a 9" angle grinder and AFAIK it would more than 60lb
i'm going out tomorrow for a CB shot at 1050y
deye243 wrote:Gunna shoot it with a 7mm mag but it wont put a hole in it as it will be a grand or more this is a 5mm plate at 1200y
bentaz wrote:Google star picket removers, yo should be able to make one of them and then your pickets will come out with ease aswell.
bentaz wrote:Google star picket removers
deye243 wrote:Well it works fine did this on Monday in a left to right breeze of 28kph
Bourt wrote:Distance?
brett1868 wrote:deye243 wrote:Well it works fine did this on Monday in a left to right breeze of 28kph
That plate lacks holes Possibly the below may fix that....
<<Genesis93>> wrote:175gr... thats a lot of juice... exactly 40rounds per pound of 2218
(ok, it doesnt come in pounds, but its an even number!)
deye243 wrote:<<Genesis93>> wrote:175gr... thats a lot of juice... exactly 40rounds per pound of 2218
(ok, it doesnt come in pounds, but its an even number!)
44 per 500 grams
deye243 wrote:<<Genesis93>> wrote:175gr... thats a lot of juice... exactly 40rounds per pound of 2218
(ok, it doesnt come in pounds, but its an even number!)
44 per 500 grams
deye243 wrote:yes but every time i do something on movie maker it degrades the crap out of it like it was done with a 2MP camera
brett1868 wrote:deye243 wrote:yes but every time i do something on movie maker it degrades the crap out of it like it was done with a 2MP camera
More keen to hear the sound then the pic...I've had ideas to see if I can find some old church or school bells to shoot. Set them a nice distance so they ring but not destroyed, could be fun me thinks.
Did you work out a good method of securing the target? I'm looking to see how you do it before making my own and any advice would be much appreciated.