Miroku choke markings & steel

Double barrel, side by side, over-under, semi-automatic, straight-pull and lever action shotguns.

Miroku choke markings & steel

Post by russell » 25 Sep 2019, 10:20 am

I'm so confused :shock: . I have a Miroku Mk70 with 3 chokes on the way. Have been told the chokes would be Improved Cylinder, Modified and Full.

My main use for this gun will be ducks with steel shot. I assume the names given to those chokes above relate to shooting lead, and they have different names with steel. Looking at the Browning site, what those chokes would be is:

3 notches - IC lead, IC steel
2 notches, M lead, IM steel
1 notch, F lead, do not use with steel

But I looked at ozziereviews video on chokes. He had Miroku choke tubes packaging in close up, and going by that label they would be

4 notches, IC lead, M steel
3 notches, M lead, F steel
1 notch, F lead, do not use with steel

Those don't match! Can anyone shed any light on that?

Tom Roster's steel shot lethality table suggests IC-M for most of the shooting I will be doing. If the browning site is right then I should be fine with the first two chokes but if the label I saw on ozziereview's video is right then I probably need to buy another choke (IC steel). ?

I don't have the chokes in front of me so I can't count the notches.
russell
Recruit
Recruit
 
Posts: 8
Victoria

Re: Miroku choke markings & steel

Post by av1 » 25 Sep 2019, 8:41 pm

I've attached info that may help, this is from my MK70 manual.
Attachments
MirokuChokes.png
Miroku Chokes
MirokuChokes.png (131.58 KiB) Viewed 7781 times
av1
Recruit
Recruit
 
Posts: 25
Victoria

Re: Miroku choke markings & steel

Post by russell » 26 Sep 2019, 10:11 am

av1 wrote:I've attached info that may help, this is from my MK70 manual.


Thanks very much for that - what chokes did your MK70 come with?
russell
Recruit
Recruit
 
Posts: 8
Victoria

Re: Miroku choke markings & steel

Post by av1 » 26 Sep 2019, 12:41 pm

You are welcome.
full
imp mod
mod
imp cyl
and skeet
av1
Recruit
Recruit
 
Posts: 25
Victoria

Re: Miroku choke markings & steel

Post by WBMK70 » 20 Apr 2023, 6:33 pm

Picked up my MK70 28" Tuesday. It came with
1. Full
11. IMod
111. Mod
1111.IMCyl
11111 Skeet

Tried it out yesterday at 5 Stand with Mod (U) and IMod (O). Not too bad at all. Still experimenting
Pattern Test (IMod) was excellent POI at 17 Meters 65/35 with figure 8 on beads. 50/50 covered bead
50/50 left or right
WBMK70
Recruit
Recruit
 
Posts: 1
New South Wales


Back to top
 
Return to Shotguns - 12 gauge, 28 gauge, 410 bore etc.