Building a Mauser stalking rifle - what action?

Bolt action rifles, lever action, pump action, self loading rifles and other miscellaneous longarms.

Re: Building a Mauser stalking rifle - what action?

Post by bigrich » 14 Nov 2026, 3:50 am

Wapiti wrote:Great might idea, although might be awhile, I'm just on a holiday in St Vincent's Memorial after correcting that bloody motor bike stack you know about


get well soon mate , hope everything goes smoothly :thumbsup: i'll get in touch soon :thumbsup:
bigrich
General
General
 
Posts: 6764
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 14 Nov 2026, 8:29 am

Thanks Rich. Four reconditioned vertebrae so I should be better than before. More metal.
But the WiFi is fast so in-between rehab stuff I can do some mega research!
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 16 Nov 2026, 11:35 am

Does anyone have any advice on a supplier here that has walnut gunstocks to suit the Santa Barbera action?
Probably No.1 profile sporter barrel? It's a pretzel.
I was trying to get onto Boyd's and see if they do one for that, but for some reason I can't make the site work to get past the "configure your stock" option that you have to do. I think.
Might sound bodgy, but the previous stock from them I got through Backcountry Outfitters had amazing grain quality. To me anyway.
I will decide whether I need to learn to do checkering... that might be a disaster though.
But like everything else in life, if someone else can do it, why couldn't I.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by straightshooter » 17 Nov 2026, 7:26 am

You could try Richards Microfit in the US. Over the years I have bought a number of 99% inlet stocks from them ranging from basic to the fanciest grades.
Unfortunately they don't offer a so called hog's back stock which I find ideal for quick off hand shooting.
Santa Barbara action won't mean anything to them but the Interarms Mark X inlet is identical.
Hopefully they will still export to Australia if the ITAR regulations haven't become more restrictive.
"Anything is possible if you don't know what you are talking about."
"There is no expedient to which a man will not resort to avoid the real labor of thinking." Sir Joshua Reynolds
straightshooter
Warrant Officer C1
Warrant Officer C1
 
Posts: 1482
New South Wales

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 17 Nov 2026, 8:53 am

I will hop onto that, thank you Straightshooter.
No hogsback... not a great loss for me. I'm just after classic English.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 17 Nov 2026, 3:28 pm

Went to Rebels today, finally got a loading block big enough for 338 Lapua, and a box to put that long loaded ammo on, base-up.
Not easy to find.
No 12g rubber buckshot though, I'm struggling to find a supplier nowadays.

Anyway, had a yarn to them about the Boyds walnut stocks, and I've done the build - red english buttpad, black forend tip, pistol grip cap, 14.5" LOP.
Hopefully back-Country outfitters will bring it in like that for me. Just got to check the centres of the action bolts.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by perentie » 18 Nov 2026, 5:26 am

Getting around OK after the Op then.
Well done.

Keith
perentie
Corporal
Corporal
 
Posts: 414
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 18 Nov 2026, 5:44 am

Thanks Keith. Got a ways to go yet, at first I thought I could just power through by being my usual stubborn self but, no... wrong again. :lol: Damn motorcycles vs cars. But nowhere to go but forward.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by bigrich » 19 Nov 2026, 3:51 am

Wapiti wrote:Went to Rebels today, finally got a loading block big enough for 338 Lapua, and a box to put that long loaded ammo on, base-up.
Not easy to find.
No 12g rubber buckshot though, I'm struggling to find a supplier nowadays.

Anyway, had a yarn to them about the Boyds walnut stocks, and I've done the build - red english buttpad, black forend tip, pistol grip cap, 14.5" LOP.
Hopefully back-Country outfitters will bring it in like that for me. Just got to check the centres of the action bolts.


go on the boyd's website and build what you want , write it all down , and get a local importer to order for you . i looked into this , "hunting haven" in sydney apparently do this all the time . checkering is what's missing from locally sold boyd stocks , they have some options , skip line patterns appeal to me .
i'd like a stock or 2 for my rifles/projects , need to do some saving :roll:
bigrich
General
General
 
Posts: 6764
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 19 Nov 2026, 5:37 am

Yeah Rich, all looks great with what's offered, an unreal service for the money but checkering was not an option. I might go back and see if I missed it.

I have cleaned checkering up with some suitable angled small files - I actually only mostly used the tip where I sharpen it - where others have sanded it half out or filled it with re-finishing crud but that's cheating because it was already there.
Extremely apprehensive about doing it myself from scratch because no real coming back from a screw-up.
Plus I've never seen any checkering tools or templates locally.

THEN - When looking at a couple of custom Mausers being resold at Rebels in Brisbane, I realise that with the PH I have, the only way to give it even 1/4 of that feel will be in the stock and the kind of finish I give it. It will have to be a completely matt, filled-grain rubbed oil type.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by bigrich » 19 Nov 2026, 4:58 pm

Wapiti wrote:Yeah Rich, all looks great with what's offered, an unreal service for the money but checkering was not an option. I might go back and see if I missed it.

I have cleaned checkering up with some suitable angled small files - I actually only mostly used the tip where I sharpen it - where others have sanded it half out or filled it with re-finishing crud but that's cheating because it was already there.
Extremely apprehensive about doing it myself from scratch because no real coming back from a screw-up.
Plus I've never seen any checkering tools or templates locally.

THEN - When looking at a couple of custom Mausers being resold at Rebels in Brisbane, I realise that with the PH I have, the only way to give it even 1/4 of that feel will be in the stock and the kind of finish I give it. It will have to be a completely matt, filled-grain rubbed oil type.


if you want a real nice stock , made to suit you , out of roger vardy high grade walnut , brett at bdr stocks in browns plains is the man . hatchers uses fast cured turkish walnut that can move as it ages . i'd say 2k is a base line cost for a custom stock from brett . he does good work , does stocks for anthony george , the NT gunsmith who builds big game rifles . if you want bretts number i can pass it on . cheers
bigrich
General
General
 
Posts: 6764
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 19 Nov 2026, 7:07 pm

I'll see what happens here.
I'm beginning to think that, although this PH is pretty much as new, it's really only a cheapie.
Backcountry is checking with Boyds to see if they can get some laser-checkering done on the stock I've just outlined I'd like,
black forend angled tip, grip cap, red Pachmeyr pad, 14.5" LOP for my monkey-arms etc. Grain unfilled for me to rub in a month of danish oil coats and it's already $700 US without checkering.
We'll see.
And I haven't shot the rifle yet.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by bigrich » 20 Nov 2026, 3:43 am

Wapiti wrote:I'll see what happens here.
I'm beginning to think that, although this PH is pretty much as new, it's really only a cheapie.
Backcountry is checking with Boyds to see if they can get some laser-checkering done on the stock I've just outlined I'd like,
black forend angled tip, grip cap, red Pachmeyr pad, 14.5" LOP for my monkey-arms etc. Grain unfilled for me to rub in a month of danish oil coats and it's already $700 US without checkering.
We'll see.
And I haven't shot the rifle yet.


yeah , it comes down to money , in a sense of what's practical and reasonable for intended use . that 7x57 at rebel is about as perfect a custom mauser as i could want . AAA grade walnut stock , model 70 style safety on the bolt ( these are close to $500 not fitted), loopy scope and mounts . BUT , it's too nice , i'd be scared to put a mark on it ;) .it'd cost a fair bit more to build than the $3690 rebel are asking for it , it's also more money than i can afford to spend . that's why i built a 7x57 on a MK1 ruger that points and carries brilliantly, and has a slick reliable action . after buying the donor 270 ruger and having it rebarreled, and some bedding done by my stock guy it owes me about 2k . that i can justify as it's a useable but reasonably unique and desirable rifle in it's own right . if i didn't build on the ruger a winchester 70 push feed XTR would've been another possibility but they are a heavy rifle , normally extremely accurate with a brilliant trigger but . the bottom line is that my ruger satisfies my collector and history wants without being too prissy or rare/expensive to get out of my safe and get some scratches and marks on it . i think your parker hale fits that bill . mauser action in a nimble, quick to point stock . expensive , no , unique and desirable , yes . it's up to you to decide what best satisfies your desire as opposed to how much your happy to spend . that's the hard part :D calibre choice is another can of worms , but from a practical point of view , so long as the action length suits , 30-06 would be my choice . 270win would be a slightly better choice, but i think 270win cartridge length becomes a issue in 98 actions JMHO :thumbsup:
bigrich
General
General
 
Posts: 6764
Queensland

Re: Building a Mauser stalking rifle - what action?

Post by Wapiti » 20 Nov 2026, 6:57 am

$1300 AUD is the cost of the walnut stock, Grade XX without checkering - they don't do it at Boyd's.
But that's with the installed angled black forend tip, grip cap and red Pachmeyr pad.

I still have to check that the action hole dimensions, receiver diameter etc is the same as the one they do.
"The only way to avoid criticism is to do nothing, say nothing, and be nothing."
Aristotle.
Regards G,
AKA "Dr. Doolittle"
A term given to me by a departed forum member, meant to insult... but it's me to a tee.
Wapiti
Lieutenant Colonel
Lieutenant Colonel
 
Posts: 3327
Queensland

Previous

Back to top
 
Return to Centerfire rifles