Chronos wrote:I have traditional dies for and you can F/L resize on it although I haven't tried
COLLECTOR 1 wrote:I quite often us a Lee Hand Press when im away and getting a bit low on loaded ammo....
COLLECTOR 1 wrote:I quite often us a Lee Hand Press when im away and getting a bit low on loaded ammo....
Im sure there is a Youtube link somewhere for it,,,great little invention, uses conventional dies, and its fun,,,
COLLECTOR 1
AusTac wrote:Lee loader if you can deal with hammering
Oldbloke wrote:One of these http://leeprecision.com/breech-lock-hand-press.html (Hard work) OR
http://leeprecision.com/reloading-kits/ ... der-rifle/ (cheapest option & hard work) OR
http://leeprecision.com/50th-anniversar ... r-kit.html (or similar) (about $230) Just add dies. Just make a bracket and clamp it to the rear bumper bar of the van. Do the weighing & cleaning inside the van.
Oldbloke wrote:You must get around a bit. Not a bad life style.
bladeracer wrote:Personally, I hate carrying a vehicle around in the bush.
Gamerancher wrote:The Lee Reloading kit is good value for money. Just set one up for a mate on a piece of 200 x 40 timber about 500 long. Press at one end, powder thrower at the other. A decent 4 inch G-clamp holds it solid on any bench/ table.
bigfellascott wrote:A press mounted on a solid bit of timber with some G clamps to hold it in place should be portable enough setup that can be used pretty much anywhere, Or a press mounted on one of those Triton Work Mate benches would be ok too I'd imagine.