Metalmik84 wrote:Thanks pomemax That's at least somewhere to start!
Metalmik84 wrote:So I'm assuming the only avenue is to search for an old bolt from the same model then have a gunsmith fit and check it?
I haven't had any luck getting through to that number as yet. It seems to go straight to an answering machine but the lady who has recorded the message does say who I have reached.
bladeracer wrote:
I would think the same bolt is used in more than just the one model.
But trying to make any sense at all of Anschutz's model numbering is far beyond my abilities.
It's probably even possible to adapt a completely different bolt to work in it.
I spent some hours trying to dig up information on my brother's Anschutz 64MS and found a lot more conflicting opinions than any factual information. It might be that there are Anschutz forums around nowadays that might be more helpful.
You could try starting on Rimfirecentral.com as they're one of the biggest rimfire forums.
Metalmik84 wrote:Thanks bladeracer. I just emailed Anschutz themselves who gave me a reply in minutes. They said a 1451 bolt would also fit and suggest trying to find one of those second hand. I found one on eBay in the states which states a fee models including 1451 but not mine. It's very confusing....
Another question... If I found one overseas what is the process to to have it sent here?
Metalmik84 wrote:The guy I emailed from Anschutz has confirmed this would do the job... Fingers crossed they know what they are talking about.
https://m.ebay.com/itm/Complete-Anschutz-Bolt-for-the-smaller-64-action-NICE-NO-RESERVE/282896388172?hash=item41ddf0504c:g:v6wAAOSwnBJatGWl&_trkparms=gclientid%3DYcj-ER4cj51OXK8pLao9ooUM8Bhswd8aev_TFFJO88TYSWScZcRvsTpS63maO399&_trksid=p2489528.m4335.l8656
Won't ship to Australia If I had a friend in the US purchase it how would I legally get it here?